Loading ...
Loading ...
Loading ...
(74,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
7. Before having a child sit in the child
restraint system, try to move it back
and forth and right and left to check if it
is firmly secured. Sometimes a child
restraint system can be more firmly
secured by pushing it down into the
seat cushion and then tightening the
seatbelt. It should not be possible to
move the child restraint system more
than 1 in (2.5 cm) in any direction along
the seatbelt path.
8. If the seatbelt has been set to the ALR
mode in step 7, pull at the shoulder
portion of the belt to confirm that it
cannot be pulled out (ALR properly
functioning).
9. To remove the child restraint system,
press the release button on the seat-
belt buckle and allow the belt to retract
completely. The belt will return to the
ELR mode.
NOTE
When the child restraint system is no
longer in use, remove it and restore the
ELR function of the retractor. That
function is restored by allowing the
seatbelt to retract fully.
! Installing a forward facing child
restraint system
S01AG0402
WARNING
. NEVER INSTALL A CHILD RE-
STRAINT SYSTEM IN THE FRONT
PASSENGER’S SEAT. DOING SO
RISKS SERIOUS INJURY OR
DEATH TO THE CHILD BY PLA-
CING THE CHILD’S HEAD TOO
CLOSE TO THE SRS AIRBAG.
. Before installing a child restraint
system, be sure to confirm that
the seatback is securely locked
into place. Otherwise, in an acci-
dent, serious injury or death
could result.
1. If the seat is equipped with a slide
mechanism, set the seat as far back as
possible.
2. Place the child restraint system in the
rear seating position.
3. If there is a gap between the child
restraint system and the seatback,
adjust the seatback angle until good
contact is achieved.
4. If the child restraint system makes
contact with the head restraint of the
rear seating position where the child
restraint system is to be installed, raise
Child restraint systems
72
Loading ...
Loading ...
Loading ...