Loading ...
Loading ...
Loading ...
(145,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
. Locking using the power rear gate
lock button. For details, refer to
“Locking with the power rear gate
lock button” �P123.
Security indicator light
NOTE
All doors and the rear gate will lock, an
electronic chirp will sound once, the
hazard warning flashers will flash once,
and the security indicator light will start
flashing rapidly.
5. Approximately 30 seconds later, the
system will enter surveillance state.
When the system is in surveillance state,
the security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has been
armed for surveillance.
NOTE
. The system can be armed even if the
windows and/or moonroof are open.
Always make sure that they are fully
closed before arming the system.
. When arming the system, if any of
the doors or the rear gate is not fully
closed, an electronic chirp sounds
five times and the hazard warning
flashers flash five times to alert you
that the doors (or the rear gate) are
not properly closed. When you close
the door, doors will automatically
lock and the system will automati-
cally arm in 30 seconds.
. The 30-second standby time can be
eliminated if you prefer. Have it
performed by your SUBARU dealer.
. If any of the following actions is
done during the standby period, the
system will not switch to the surveil-
lance state.
– Doors (including the rear gate)
are unlocked using the access
key fob/remote transmitter.
– Doors (including the rear gate)
are unlocked using the keyless
access function (models with
“keyless access with push-but-
ton start system”).
– Any door (including the rear gate)
is opened.
– The ignition switch is turned to
the “ON” position (models with-
out “keyless access with push-
button start system”).
– Push-button ignition switch is
turned to the “ACC” position
(models with “keyless access
with push-button start system”).
& Disarming the system
S02AF05
Perform either of the following procedures.
. Briefly press a button (for less than 2
seconds) on the access key fob/remote
transmitter.
. Carry the access key fob and perform
either of the following procedures
(models with “keyless access with
push-button start system”).
– Grip the front door handle.
– Press the rear gate opener button.
– Unlock using the PIN code access.
The flashing of the security indicator light
will then change slowly (once approxi-
mately every 3 seconds from twice ap-
proximately every 2 seconds), indicating
that the alarm system has been disarmed.
– CONTINUED –
Alarm system
143
2
Keys and doors
Loading ...
Loading ...
Loading ...