Loading ...
Loading ...
Loading ...
(239,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
– Immediately after the engine has
started.
. In the following conditions, the head-
light mode will not be automatically
changed from the high beam to the low
beam.
– When your vehicle passes an on-
coming vehicle suddenly in a blind
curve.
– When another vehicle passes in
front of your vehicle.
– When an oncoming vehicle or ve-
hicle ahead comes in and out of
view because of continuous curves,
median strips, roadside trees, etc.
. If the stereo camera detects the light of
the front fog lights of an oncoming
vehicle, the headlight mode may
change from the high beam to the low
beam automatically.
. The headlight mode may change from
the high beam to the low beam, or the
low beam mode may continue, when
affected by a street light, traffic signal,
illumination of an advertisement board,
or a reflective object such as a road
sign and signboard.
. The timing of the change of headlight
mode may differ due to the following
factors.
– Color or brightness of the headlights
of an oncoming vehicle or the tail
lights of a vehicle ahead.
– The headlights of the oncoming
vehicle or the tail lights of the vehicle
ahead are covered with mud, snow,
etc.
– Movement and direction of an on-
coming vehicle or a vehicle ahead.
– When the headlights of an oncom-
ing vehicle or the tail lights of a
vehicle ahead illuminate on only one
side.
– When the oncoming vehicle or
vehicle ahead is a motorcycle.
– Conditions of a road (slope, curve,
road surface, etc.).
– Number of passengers and weight
of loaded cargo.
– Limitation of the detection ability of
the stereo camera.
& Daytime running light system
S03AH04
WARNING
When the daytime running lights are
illuminated, the tail lights do not
illuminate. When it becomes dark
outside, turn the light switch to the
“
” position to illuminate the head-
lights and tail lights. This will im-
prove visibility and allow other dri-
vers to see your vehicle more easily.
The daytime running lights will automati-
cally illuminate when the following condi-
tions are fulfilled.
. The engine is running.
. The parking brake is fully released.
. The light control switch is in “AUTO”,
“
” or “OFF” (for Canada models).
. The select lever is in a position other
than the “P” position.
NOTE
When the light switch is in the “
”
position, the instrument panel illumina-
tion, front side marker lights, tail lights
and license plate lights are also illumi-
nated.
Light control switch
237
3
Instruments and controls
Loading ...
Loading ...
Loading ...