Loading ...
Loading ...
Loading ...
(251,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
1 Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 in (2 to 8
cm) away from the HomeLink button
that you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 in (15 to
30 cm). Keep this in mind if you have
difficulty with the programming pro-
cess.
3. While the HomeLink indicator light is
flashing orange, press and hold the
hand-held remote button. Continue
pressing the hand-held remote button
until the HomeLink indicator light
changes from orange to green. You
may now release the hand-held remote
button.
NOTE
Some devices may require you to re-
place this “Programming a New
HomeLink Button” step 3 with proce-
dures noted in the “Gate Operator /
Canadian Programming” section. Refer
to “Gate Operator/Canadian Program-
ming” �P251.
1 Indicator Light
4. Press the HomeLink button that you
would like to program and observe the
indicator light.
. If the indicator light remains constant
green, your device should operate
when the HomeLink button is
pressed. At this point, if your device
operates, programming is complete.
. If the indicator light rapidly flashes
green, firmly press, hold for two
seconds and release the HomeLink
button up to three times to complete
the programming process. At this
point if your device operates, pro-
gramming is complete. If the device
does not operate, continue with the
next step of the programming in-
structions.
– CONTINUED –
Mirrors
249
3
Instruments and controls
Loading ...
Loading ...
Loading ...