Loading ...
Loading ...
Loading ...
(349,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
NOTE
. After the engine starts, the engine
speed will be kept high.
. When the push-button ignition
switch is pressed while depressing
the brake pedal, the engine starter
operates for a maximum of 10 sec-
onds. After starting the engine, the
starter stops automatically.
. When the push-button ignition
switch is pressed while depressing
the brake pedal, the engine can be
started regardless of the status of
the push-button ignition switch.
. If the security indicator light illumi-
nates when you attempt to start the
engine but the engine does not start,
press the push-button ignition
switch to switch the power to
“OFF” and then try to start the
engine again.
. If the engine does not start, press the
push-button ignition switch without
depressing the brake pedal to switch
the power to “OFF”. Then, while
depressing the brake pedal more
forcefully, press the push-button
ignition switch.
. The engine start procedures may not
function depending on the radio
wave conditions around the vehicle.
In such a case, refer to “Starting
engine” �P465.
. It may be difficult to start the engine
when the battery has been discon-
nected and reconnected (for main-
tenance or other purposes). This
difficulty is caused by the electro-
nically controlled throttle’s self-di-
agnosis function. To overcome it,
keep the ignition switch in the “ON”
position for approximately 10 sec-
onds before starting the engine.
. If the vehicle battery is discharged,
the steering cannot be unlocked.
Charge the battery.
. Do not shift the select lever while the
starter is cranking.
1 Operation indicator
2 Push-button ignition switch
When the push-button ignition switch is
pressed while depressing the brake pedal,
the engine will start. The starting proce-
dure for the engine is as follows.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Apply the parking brake.
3. Shift the select lever into the “P”
position. The engine can also start
when the select lever is in the “N”
position, however, for safety reasons,
start in the “P” position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When
starting with the select lever in the “N”
position, the indicator does not turn
green.
5. While depressing the brake pedal,
press the push-button ignition switch.
NOTE
. While pressing the select lever but-
ton in, the indicator on the push-
button ignition switch will not turn
green even when the select lever is
in the “P” position.
. In case the engine does not start by
the normal engine start procedure,
move the select lever to the “P”
position, and switch the power to
– CONTINUED –
Starting and stopping engine (models with push-button start system)
347
7
Starting and operating
Loading ...
Loading ...
Loading ...