Loading ...
Loading ...
Loading ...
(489,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
CAUTION
If the level gauge cannot be pulled
out easily, twist the level gauge right
and left, then gently pull it out.
Otherwise, you may be injured acci-
dentally straining yourself.
2. Pull out the level gauge, wipe it clean,
and insert it again.
3. Be sure the level gauge is correctly
inserted until it stops.
1 Full level
2 Low level
3 Approximately 1.1 US qt (1.0 liters, 0.9
Imp qt) from low level to full level
4. Pull out the oil level gauge again.
5. Check the oil levels on both sides of the
level gauge. The engine oil level must
be judged by the lowest of the two
levels. If the oil level is below the low
level mark, add oil so that the full level
is reached.
CAUTION
. Be careful not to touch the engine
oil filter when removing the oil
filler cap. Doing so may result in a
burn, a pinched finger, or may
cause some other injury.
. Use only engine oil with the
recommended grade and vis-
cosity.
. Be careful not to spill engine oil
when adding it. If oil touches the
exhaust pipe, it may cause a bad
smell, smoke, and/or a fire. If
engine oil gets on the exhaust
pipe, be sure to wipe it off.
To add engine oil, remove the engine oil
filler cap and slowly pour engine oil
through the filler neck. After pouring oil
into the engine, you must use the level
gauge to confirm that the oil level is
correct.
NOTE
. To prevent overfilling the engine oil,
do not add any additional oil above
the upper level when the engine is
cold.
. The engine low oil level warning light
may stay illuminated when the en-
gine is started straight after topping
up or changing the engine oil. In
such cases, park the vehicle on a
level surface and wait for more than
a minute until the oil level settles,
after which the warning light will turn
off. Refer to “Engine low oil level
warning light” �P177.
– CONTINUED –
Engine oil
487
11
Maintenance and service
Loading ...
Loading ...
Loading ...