Loading ...
Loading ...
Loading ...
(238,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
assist function returns to normal
level the next time the ignition
switch is turned to the “LOCK”/
“OFF” position and the engine is
restarted.
! How to change the headlight mode
manually
S03AH0702
Change to the low beam:
When you return the turn signal lever to the
center position, the high beam assist
function will turn off and the high beam
assist indicator light will turn off.
Change to the high beam:
When you turn the light control switch to
the “
” position, the headlight mode will
be changed to the high beam.
At this time, the high beam assist function
will turn off, the high beam assist indicator
light will turn off and the high beam
indicator light will turn on.
NOTE
. After manually changing the head-
light mode to the high beam, if you
turn on the high beam assist func-
tion, return the light control switch
to the “AUTO” position.
. When manually changing the head-
light mode to the high beam, if you
turn the light control switch to the
“
” position, the instrument panel
illumination, parking lights, front
side marker lights, rear side marker
lights, tail lights and license plate
lights will be on.
! Tips for the high beam assist sys-
tem
S03AH0703
. The high beam assist function recog-
nizes the conditions surrounding the
vehicle based on the brightness of
illumination ahead of your vehicle, etc.
Therefore, the headlight mode may
switch in some situations that do not
match to the driver’s sense.
. A bicycle or cargo cycle may not be
detected.
. Under the following situations, the
brightness of ambient illumination may
not be detected correctly and the high
beam assist function may not work
properly. As a result, the glare of the
high beam may disturb the oncoming
vehicle or vehicle ahead. Also, the low
beam mode may continue although
there are no oncoming vehicles and
vehicles ahead. In the such cases,
change the headlight mode manually.
– In bad weather (fog, snow, sand
storm, heavy rain, etc.).
– When the windshield glass is dirty or
fogged.
– When the windshield is cracked or
damaged.
– When the stereo camera is de-
formed or the stereo camera lenses
are dirty.
– If there are lights similar to the
headlights or the tail lights in the
surrounding area.
– When an oncoming vehicle or ve-
hicle ahead is driven without its
headlights and tail lights on.
– If the headlights of an oncoming
vehicle or the tail lights of a vehicle
ahead are dirty or discolored, or if
the light beams are not aimed
correctly.
– When a rapid change of brightness
continues while driving.
– When driving on a road with many
ups and downs or uneven surfaces.
– When driving on a road with many
curves.
– When there are some objects that
reflect light strongly, such as a road
sign or a mirror in vehicle ahead.
– When the rear part of the vehicle
ahead, such as a container, reflects
light strongly.
– When the headlights of your vehicle
are damaged or dirty.
– When your vehicle is tilted, such as
in case the vehicle has a flat tire or is
being towed.
Light control switch
236
Loading ...
Loading ...
Loading ...