Loading ...
Loading ...
Loading ...
(492,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
1 “FULL” level mark
2 “LOW” level mark
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside
of the reservoir while the engine is
cool.
2. If the level is close to or lower than the
“LOW” level mark, add coolant up to
the “FULL” level mark. If the reserve
tank is empty, remove the radiator cap
and refill coolant up to just below the
filler neck as shown in the following
illustration.
1 Fill up to this level.
3. After refilling the reserve tank and the
radiator, reinstall the cap and check
that the rubber gaskets inside the
radiator cap are in the proper position.
CAUTION
. Be careful not to spill engine
coolant when adding it. If coolant
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If engine coolant gets on
the exhaust pipe, be sure to wipe
it off.
. Do not splash the engine coolant
over painted parts. The alcohol
contained in the engine coolant
may damage the paint surface.
! Changing the coolant
S11AF0202
It may be difficult to change the coolant.
Have the coolant changed by your
SUBARU dealer if necessary.
The coolant should be changed according
to the maintenance schedule in the “War-
ranty and Maintenance Booklet”.
Cooling system
490
Loading ...
Loading ...
Loading ...