Loading ...
Loading ...
Loading ...
(380,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
! To release the Auto Vehicle Hold
function
S07AP030504
Perform any of the following operations to
release the Auto Vehicle Hold function.
. Depress the accelerator pedal.
. Depress the brake pedal again.
. Apply the electronic parking brake.
. Shift the select lever to the “P” position
with the brake pedal pressed.
. Deactivate the Auto Vehicle Hold func-
tion operating with the center informa-
tion display while depressing the brake
pedal.
When the Auto Vehicle Hold function is
released, the Auto Vehicle Hold indicator
light will change from flashing to illumi-
nated.
Under any of the following conditions, the
Auto Vehicle Hold function will be auto-
matically released and the electronic
parking brake will be automatically ap-
plied.
. The Auto Vehicle Hold function has
been in operation for 10 minutes.
. The driver’s seatbelt is unfastened.
. The ignition switch is turned to the
“LOCK”/“OFF” position.
. The vehicle is stopped on a steep
slope.
. The Auto Vehicle Hold function is
malfunctioning.
In such cases, the Auto Vehicle Hold
indicator light will turn off and the electronic
parking brake indicator light will illuminate.
! Tips
S07AP030505
. When the electronic parking brake is
automatically applied with the vehicle
kept held by the Auto Vehicle Hold
function, release the electronic parking
brake by either of the following opera-
tions before starting off. Then make
sure that the electronic parking brake
indicator light is off.
– Depress the accelerator pedal with
the driver’s seatbelt fastened and
with the doors closed.
– Press the electronic parking brake
switch with the brake pedal de-
pressed.
. Under certain conditions, including a
malfunction of the Auto Vehicle Hold, a
warning buzzer will sound and a warn-
ing message will appear on the combi-
nation meter display (color LCD). All
warning messages should be strictly
observed.
. On a steep slope, the vehicle cannot be
kept held by the Auto Vehicle Hold
function. In such a case, depress and
hold the brake pedal.
. When holding on a steep slope with the
Auto Vehicle Hold function activated,
the electronic parking brake may auto-
matically applied after stopping, then
the electronic parking brake indicator
light may flash. In such a case, depress
and hold the brake pedal while stopped.
Otherwise, the vehicle may move.
When getting out of the vehicle, stop
the vehicle on a flat surface, then apply
the electronic parking brake.
. If the Auto Vehicle Hold indicator light
does not illuminates even after touch-
ing “Auto Vehicle Hold (AVH)” with the
operating conditions met, the function
may have a malfunction. Contact your
SUBARU dealer for an inspection.
. You may hear a sound while the Auto
Vehicle Hold function is keeping your
vehicle stopped. This is normal, and
does not represent a malfunction.
. While the vehicle is kept held by the
Auto Vehicle Hold function, the brake
pedal may feel stiff. However, this is not
a malfunction.
. When using the Auto Vehicle Hold
function, depress the brake pedal
firmly. Otherwise, the Auto Vehicle Hold
may not operate.
Parking your vehicle
378
Loading ...
Loading ...
Loading ...