Loading ...
Loading ...
Loading ...
En
9
Part names and functions
! [PHONO/LINE]: Uses a phono level (for MM cartridges) output
device (analog player, etc.) connected to the [LINE/PHONO]
input terminals.
= Using external inputs (p. 25 )
! [USB B]: Uses the track loaded in the rekordbox dj deck.
4 USB A, LINE, USB B selector switch
Selects the input source for each channel from the components
connected to this unit.
! [USB A]: Uses the track loaded in the rekordbox dj deck.
! [LINE]: Uses a line level output device (DJ player, etc.) connected
to the [LINE] input terminals.
= Using external inputs (p. 25 )
! [USB B]: Uses the track loaded in the rekordbox dj deck.
5 MASTER LEVEL control
Adjusts the level of sound output to the master channel.
6 CLIP indicator
[CLIP] blinks when the output level is too high.
— Blinking slowly: indicates that the sound is about to be distorted.
— Blinking quickly: Indicates that the sound is distorted.
7 Master level indicator
Displays the level of sound output to the master channel.
8 BOOTH MONITOR LEVEL control
Adjusts the level of sound output to the booth channel.
9 MASTER CUE button
Outputs the sound of the master channel to the headphones.
a Effect section display
Displays the effect name, BPM, effect parameter, etc.
b BEAT c, d buttons
Press:
Set the beat fraction to synchronize the effect sound with.
Press [SHIFT] + [BEAT c]:
Sets the mode for automatically measuring the BPM from the input
audio signal.
Press [SHIFT] + [BEAT d]:
Sets the mode for inputting the BPM manually.
c BEAT FX SELECT control
Sets the BEAT FX type.
d BEAT FX CH SELECT control
Switches the channel to which the BEAT FX is to be applied.
e BEAT FX LEVEL/DEPTH control
Adjusts the BEAT FX quantitative parameter.
f BEAT FX ON/OFF button
Press:
Turns BEAT FX on and off.
[SHIFT] + Press:
Turns release FX on for rekordbox.
= Using the BEAT FX function (p. 21 )
g HEADPHONES LEVEL control
Adjusts the level of sound output to the headphones.
h HEADPHONES MIXING control
Adjusts the balance of the monitor volume between the sound of the
channels for which the headphones [CUE] button is pressed and the
sound of the master channel.
i SAMPLER VOL control
Adjusts the sound level of the sampler.
j SAMPLER CUE button
Outputs the sound of the sampler to the headphones.
k SOUND COLOR FX SELECT buttons
Turns on and off SOUND COLOR FX.
= Using the SOUND COLOR FX function (p. 24 )
l MIC EQ (HI, LOW)controls
Adjusts the tone quality of the [MIC1] and [MIC2] channels.
m MIC2 LEVEL control
Adjusts the level of sound output from the [MIC2] channel.
n MIC1 LEVEL control
Adjusts the level of sound output from the [MIC1] channel.
o Channel level indicator
Displays the sound level of each channel before it passes through
the channel faders.
p TRIM control
Adjusts the level of sound output from each channel.
q EQ (HI, MID, LOW) control
Boosts or cuts frequencies for the different channels.
r COLOR control
Changes the parameters of the SOUND COLOR FX of the different
channels.
s Headphones CUE button
Press:
Outputs the sound of the channel for which this button is pressed to
the headphones.
[SHIFT] + Press:
The tempo for each deck can be set by tapping this button. (Tap
function)
t Channel fader
Adjusts the level of sound output from each channel.
u Crossfader assign selector switch
Assigns the channel output to the crossfader.
[A]: Outputs to [A] (left) of the crossfader.
[B]: Outputs to [B] (right) of the crossfader.
[THRU]: Select when not using the crossfader. The signals do not
pass through the crossfader.
v Crossfader
Outputs the sound assigned by the crossfader assign switch.
Do not pull the channel fader and crossfader knobs with excessive
force. The knobs are not detachable. Pulling the knobs with excessive
force may break the unit.
Loading ...
Loading ...
Loading ...