Loading ...
Loading ...
Loading ...
En
17
Advanced operation
Advanced operation
Using 4 beat loops
% During loop playback, press the [4 BEAT LOOP/EXIT]
button.
A 4 beat loop automatically starts from the point where the button is
pressed, and loop playback starts.
! When the quantize function is on, there may be a slight delay in
operation of this function to synchronize the beat.
Canceling loop playback
% Press the [4 BEAT LOOP/EXIT] button again.
Playback continues beyond the loop-out point without returning to the
loop-in point.
Using manual loops
Use this function to play specific sections repeatedly.
! When the quantize function is on, there may be a slight delay in
operation of this function to synchronize the beat.
1 During playback, press the [IN•1/2X] button at the
point where you want to start loop playback (the loop-in
point).
The loop-out point is set.
2 Press the [OUT•2X] button at the point where you
want to end loop playback (the loop out point).
Cutting loops
% During loop playback, press the [IN•1/2X] button.
Each time the button is pressed, the length of the loop playback is cut
in half.
! The length of the loop can be cut in half even during 4 beat loop
playback.
Extending loops
% During loop playback, press the [OUT•2X] button.
Each time the button is pressed, the length of the loop playback is
doubled.
! The length of the loop can be doubled even during 4 beat loop
playback.
Canceling loop playback
% Press the [4 BEAT LOOP/EXIT] button.
Playback continues beyond the loop-out point without returning to the
loop-in point.
Changing the point where loop playback
starts
% Press the [IN•1/2X] button while pressing the [SHIFT]
button, and rotate the jog dial.
Moves the position of the loop-in point.
Changing the point where loop playback
ends
% Press the [OUT•2X] button while pressing the [SHIFT]
button, and rotate the jog dial.
Moves the position of the loop-out point.
Using the performance pads
Using hot cues
You can start playback from the position where a hot cue is set. In addi-
tion to hot cues, loops can be set to call out a playback point.
! Up to 16 hot cue points can be set and stored in one track.
Setting and calling out a hot cue
1 Press the [HOT CUE] mode button.
This unit enters hot cue mode.
! For the registered 16 hot cues, you can switch to hot cues A to H
by pressing the [PAGE c] button, and hot cues I to P by pressing
the [PAGE d] button. The content of the hot cue display area
within the rekordbox dj deck screen can also be switched by
performing the same operation.
2 During playback or in pause mode, press a
performance pad to set a hot cue point.
The hot cue points are assigned to the respective performance pads as
shown below.
Hot cue AHot cue BHot cue CHot cue D
Hot cue EHot cue FHot cue GHot cue H
[PAGE
]
[PAGE
]
Hot cue IHot cue JHot cue KHot cue L
Hot cue MHot cue NHot cue OHot cue P
3 Press the performance pad to which the hot cue point
is set.
Playback starts from the hot cue point.
! Press a performance pad while pressing the [SHIFT] button to clear
the hot cue point.
Setting and calling out a 4 beat loop
1 Press the [HOT CUE] mode button.
This unit enters hot cue mode.
Loading ...
Loading ...
Loading ...