Loading ...
Loading ...
Loading ...
11
Cleaning
N.B: during prolonged cooking of foods with
a high water content (e.g. pizza, vegetables,
etc.) condensation may form on the inside of
the door and around the seal. When the oven is
cold, dry the inside of the door with a cloth or
sponge.
Accessories:
• Soak the accessories in water with washing
up detergent immediately after use, handling
them with oven gloves if still hot.
• Food residues can be easily removed using a
washing-up brush or sponge.
• See “Cleaning” for Artisan accessory cleaning.
Cleaning cycle of ovens with pyrolysis function
(if present):
WARNING
– Do not touch the oven during the pyrolysis
cycle.
– Keep children away from the oven during
the pyrolysis cycle.
– Keep animals away during and after the
pyrolysis cycle.
– Insert the cap of the cavity plug before
running a pyro cycle.
This function burns o spatter occurring inside the
oven during cooking at a temperature of approx.
500°C. At this high temperature, the deposits turn
into a light ash which can be easily wiped away
with a damp cloth, once the oven is cool.
Do not select the pyrolysis function after every
use, only when the oven is very dirty or produces
smoke or fumes while preheating or cooking.
• If the oven is installed below a hob, ensure that
all burners or electric hotplates are switched
o during the self-cleaning (pyrolysis)
function.
• Remove all accessories before running the
pyrolysis function (including the lateral grids).
• For optimum cleaning of the oven door,
remove the worst soiling with a damp sponge
before using the pyrolytic function.
• Before selecting the pyrolysis function, use
a damp sponge to remove any marks on the
round stainless steel cover of the fan (Twelix
Disc) and from the inside glass of the oven
door.
The appliance is equipped with 2 pyrolysis
functions:
1. Energy-saving cycle (PYRO EXPRESS/ECO):
which consumes approximately 25% less
energy than the standard cycle. Select it at
regular intervals (after cooking meat on 2 or 3
consecutive occasions).
2. Standard cycle (PYRO): which is suitable for
cleaning a very dirty oven.
• In any case, after a certain number of uses
and depending on how dirty the oven is, a
message on the oven display advises you to
run a self-cleaning cycle.
N.B: during the pyrolysis function, the oven
door will not open; it will remain locked until
the temperature inside the oven has returned
to an acceptably safe level.
Artisan accessory cleaning:
• Internal electrical socket: remove the metallic
plug cover; use a humidied sponge to clean
the plug. Do not use metallic and/or sharp
tools.
• After every use, allow the steam grid to cool
then clean it, preferably while it is still warm,
in order to remove built-up dirt and stains
caused by food residues (e.g. food with high
sugar content). Suitable for dishwashing.
• Soak the drip pan in water with washing up
detergent immediately after use, handling
them with oven gloves if still hot. Food
residues can be easily removed using the
brush supplied by the After-Sales Service.
Note: after a certain number of uses at high
temperatures, there is a naturally occurring
colour change of the heating element, due to the
formation of layers of ferrous oxide aggregates,
which do not aect the functionality and safety of
the component.
Descaling:
Pour in an additional 800 ml of cold white vinegar
and top up to “Max” with room temperature water.
Leave for 6-8 hours, then rinse with water and
remove any residue with a non-abrasive sponge.
Specic products for cleaning and descaling can
be purchased separately from the After-Sales
Service.
Loading ...
Loading ...
Loading ...