Loading ...
Loading ...
Loading ...
• Removing the hook cover plate
(_ Hook cover plate release button
(_) Hook cover plate
Slide the hook cover plate release button Qto the right,
and remove the cover plate (_),
• inserting the bobbin
O End of thread
_) Notch
Notch
(_ Threading chart
[] Place a bobbin in the bobbin holder with the thread
running off counterclockwise°
[] Guide the thread into the notch (_on the front side of
the bobbin holder_ Draw the thread to the left, sliding it
between the tension spring blades°
[] Continue to draw the thread lightly until the thread slips
into the notch (_. Pull out about 6" (15,,0 cm) of thread°
[] Attach the hook cover plate. Check the threading by
referring to the chart O shown on the hook cover plate.
[]
[]
[]
[]
\
®
J
....J
24
Loading ...
Loading ...
Loading ...