Loading ...
Loading ...
Loading ...
15
Setting the Cook Time
If you set Cook Time for your dish, operation
automatically stops at the end of the programmed time.
The appliance stops heating.
Note: Cook Time must always be set when using oven
modes with steam.
Example shown in the illustration:
Set Cook Time to 35 minutes.
Requirement:
An oven mode and temperature must be set.
1.
Touch TIMER/CLOCK repeatedly until the arrow
appears after the
xO Cook Time symbol.
2.
Use the settings dial to set the Cook Time.
The Cook Time is accepted after a few seconds. The
parentheses to the left and right of the Cook Time
disappear. The xO symbol lights up.
3.
If operation has not yet started, touch START/STOP.
The running Cook Time is visible in the display.
Note: When using Steam mode, the Cook Time starts
after the appliance is preheated.
After the Cook Time runs out
A beep sounds. The appliance stops heating. Touch
TIMER/CLOCK to stop the signal early.
9 CAUTION
Hot steam can escape when opening the oven
door.
Open the oven door.and use potholders to carefully
remove ovenware. Touch and hold ON/OFF until the
appliance turns off.
Changing the Cook Time
Touch TIMER/CLOCK repeatedly until the arrow appears
after the xO Cook Time symbol. Use the settings dial to
change the Cook Time. The changed Cook Time starts.
Checking the Time Settings
Use TIMER/CLOCK to check all settings.
Changing the End Time
You can change the time when the food will be done.
The appliance starts automatically and turns off at the
preferred End Time.
9 CAUTION
To maintain food safety, do not leave food in the
oven for more than one hour before or after
cooking.
Note: Some programs do not allow the End Time to be
changed.
The time required for preheating when using Steam must
be considered when setting the Cook Time. The set End
Time can be delayed to make up fo the time required for
preheating.
Delaying the End Time
The example is shown in the illustrations:
It is 9:30 a.m. The food takes 45 minutes to cook, but
should not be ready until 12:45 p.m.
Requirements:
▯ The set mode has not started.
▯ A Cook Time has been set.
1.
Touch TIMER/CLOCK repeatedly until the arrow
appears after the End Time symbol yO.
The bars in the display indicate that the End Time has
not been changed.
2.
Use the settings dial to set the End Time to a later
time.
3.
Touch START/STOP to confirm.
The setting is accepted. The appliance is in delayed
mode. The End Time yO is displayed.
Operation starts automatically at the correct time. In the
example, operation starts at 12:00 p.m. The running
Cook Time xO then appears in the display.
Loading ...
Loading ...
Loading ...