Loading ...
Loading ...
Loading ...
13
Fill the water tank before each use:
1.
Open door and remove water tank (picture A).
2.
Fill the water tank to the "max" line with cold water
(picture B).
3.
Close tank lid until it snaps.
4.
Insert water tank completely (picture C).
The tank must be flush with the tank funnel (picture D).
After each use
Empty the water tank after each use.
1.
Keep the water tank level while slowly pulling it out of
the appliance to ensure that no remaining water drips
down and out through the vent.
2.
Pour out the water.
3.
Thoroughly dry the seal of the tank lid and the slot
where the tank resides in the appliance.
Indication of water level
The 9 indicator lights up:
The water tank is only half full.
If you think that the amount of water in the water tank is
sufficient for what you want to cook, you can start the
appliance. If the water level is too low, then fill the water
tank up to “max", slide the tank back in and then start the
appliance.
The 9 indicator starts flashing:
The water tank is empty. A beep sound and operation is
stopped.
1.
Carefully open the oven door. Steam will escape from
inside.
2.
Remove the water tank, fill it and slide it back in.
3.
Press START/STOP.
Automatic Calibration
The temperature at which the water will boil depends on
the air pressure. During calibration, the appliance is
adjusted to the pressure conditions in the area where it
has been installed. This takes place automatically the
first time steam is used at 210 °F (100° C). More steam
than usual will be produced during calibration.
After moving: To ensure that the appliance will
automatically adjust to the new location, reset the
appliance to its factory settings (see Basic Settings)
Operating the Appliance
This section covers the following:
▯ Turning the appliance on and off
▯ Important instructions to follow after each use.
9 WARNING
SCALDING HAZARD
Movement when opening the appliance door and
when removing the cookware can cause hot liquid
to spray out. Do not stand too close to the
appliance when opening it. Open appliance door
carefully. Remove cookware carefully. Keep children
away.
Turning on the Appliance
Expample shown in the illustration:
Set the oven mode to Steam at 175 °F (80° C).
1.
Touch and hold ON/OFF until the appliance turns on.
OVEN MODE lights up in the display. The first oven
mode, True Convection è appears in the display.
2.
Use the settings dial to set the desired oven mode.
3.
Touch OVEN TEMP and use the settigns dial to set the
temperature.
4.
Touch TIMER/CLOCK repeatedly until the arrow
appears after the xO Cook Time symbol.
5.
Use the settings dial to set the Cook Time (see Clock
and Timer Settings).
6.
Press START/STOP to turn on the appliance.
The appliance starts to heat up. When using Steam
mode, the Cook Time starts after the appliance is
preheated.
Changing the temperature
After Cook Time starts, you can turn the settings dial at
any time to change the temperature.
PD[
%
$
'
&
Loading ...
Loading ...
Loading ...