Loading ...
Loading ...
Loading ...
Opening and closing
89
Set of vehicle keys
Fig.70 V
ehicle key: removing the battery.
SEAT recommends you ask a specialised work-
shop t
o replace the battery.
The battery is located to the rear of the vehicle
key, under a cover.
Changing the battery
●
Remove the key blade from the vehicle key
›››page88.
●
Insert the key blade into the slot ›››Fig.69,
press it in the direction of arrow
1
and detach
the co
ver by levering it
2
.
●
Remove the battery from the compartment
with a suit
able fine object ›››Fig.70.
●
Insert the new battery and press it into the
battery compartment ›››
.
●
Place the cover and press it into the vehicle
k
ey housing until it clicks into place.
WARNING
Swallowing a battery with a 20 mm diameter
or any other butt
on battery can cause seri-
ous and even fatal injuries within a very short
time.
●
Keep the vehicle key and key fobs with bat-
teries out of reach of children.
●
If you suspect that someone may have
swallowed a battery, seek immediate medi-
cal attention.
NOTICE
●
If the battery is not changed correctly, the
v
ehicle key may be damaged.
●
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specifications.
●
When fitting the battery, check that the po-
larity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
r
ectly and with respect for the environment.
Synchronize the vehicle key
If the
button is pressed frequently outside of
the v
ehicle range, it is possible that the vehicle
can no longer be locked or unlocked using the
key. In this case, the key must be resynchron-
ised as described below:
●
Stand next to the vehicle.
●
Briefly press the
button on the vehicle key
twice
.
OR:
●
Remove the emergency key ›››page87.
●
Press the
button on the key.
●
Unlock the vehicle with the emergency key.
●
Open the driver’s door. If the vehicle is fitt
ed
with an anti-theft alarm, it will trigger immedi-
ately ›››page96.
●
Switch the ignition on. Please note: to turn on
the ignition, place the vehicle key at the bottom
of the central armrest box, as close as possible
to the Kessy logo
.
This compl
etes the synchronization.
Loading ...
Loading ...
Loading ...