Loading ...
Loading ...
Loading ...
Assistant systems
201
Emergency Assist
Troubleshooting
Travel Assist is not available or does
not w
ork as expected
The control lamp switches on yellow. A relevant
warning is also displayed on the instrument
panel screen.
●
There is a fault in the sensors. Check the cau-
ses and solutions described in the information
about the ACC ›››page188 or Lane Assist
›››page197.
●
There is a fault or a defect. Switch the engine
o and on again.
●
The system limits are exceeded.
●
If the problem persists, consult a specialised
workshop. SEAT recommends visiting a SEAT
dealership.
Grip the steering wheel
The w
arning lamp lights up white, and a mes-
sage is shown on the instrument cluster display.
●
You released the steering wheel for a few sec-
onds. T
ake hold of the steering wheel and take
control of the vehicle.
Grip the steering wheel
The w
arning lamp lights up red and a mes-
sage is shown on the instrument cluster display.
Depending on the situation, an audio warning
sounds or the steering wheel vibrates.
●
You have let go of the steering wheel for
a l
ong time, or the system limits have been
reached. Immediately take hold of the steering
wheel and take control of the vehicle.
Travel Assist disconnects automatically
●
Vehicles without Emergency Assist:
You have released the steering wheel for a long
period.
●
There is a fault or a defect. Switch the engine
o and on again.
●
If the problem persists, consult a specialised
workshop. SEAT recommends visiting a SEAT
dealership.
The adjustment is interrupted unexpectedly
●
Vehicles without lane departure warning:
You have turned on the turn signal.
Lane departure warning not available
The contr
ol lamp switches on yellow. A relevant
warning is also displayed on the instrument
panel screen.
●
There is a fault in the sensors. Check the
described causes and the corr
ective measures
in the Side Assist information.
●
If the problem persists, consult a specialised
w
orkshop. CUPRA recommends visiting a speci-
alised CUPRA dealer or any SEAT dealership.
Lane change assist is interrupted or unavail-
able
A message about this is shown on the instru-
ment cluster display.
●
The vehicle has stopped detecting lane
markings.
●
You have let go of the steering wheel
●
You are applying too much force to the steer-
ing wheel.
●
You have turned on the turn signal too many
times, or the turn signal lever is stuck.
●
The driving speed is lower than around
85km/h.
●
The vehicle has detected objects in the vicin-
ity that prevent an assisted lane change.
●
You are not on a multi-lane motorway.
Emergency Assist
How it works
Emergency Assist can detect whether there is
inactivity by the driver and can automatically
keep the car in its lane and stop it altogether
if necessary. This way the system can actively
help avoid an accident or reduce its conse-
quences.
Emergency Assist uses the same sensors as
Adaptive Cruise Control (ACC) and Lane As-
sist. Therefore, carefully read the information
about the ACC ›››page183 and Lane Assist
Loading ...
Loading ...
Loading ...