Loading ...
Loading ...
Loading ...
116
Seats and head restraints
Seat functions
Memory function
Fig.98 On the out
er side of the driver seat:
memory buttons.
Memory buttons
The memory butt
ons can be used to save and
turn on settings for the driver seat and the exte-
rior mirrors.
The settings will also be saved in the user of the
online services.
Save the settings of the driver seat and the
exterior mirrors while driving forward
●
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Adjust the driver seat and the exterior mirrors.
●
Press for longer than 1 second ›››Fig.98.
●
Press the memory button in which to store the
settings within appr
ox. 10 seconds. A warning
sound will confirm they have been stored.
Storing the passenger rear view mirror set-
tings while driving in reverse
●
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Press the required memory button.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb edge
well.
●
The new position of the mirror will be stored
automatically and allocated to the vehicle key
that was used to unlock the vehicle.
Activating settings
●
With the vehicle stopped and the ignition
switched on, press and hold the correspond-
ing memory button until the saved position is
reached.
●
OR: With the ignition switched o and the
driver's door open, briefly press the corre-
sponding button.
The front passenger side exterior mirror auto-
matically changes from the position stored for
reversing as soon as the vehicle moves forward
at a speed of at least 15km/h (10mph) or when
the gear selection lever is changed to a position
other than R ›››page129.
Initialising the seat position memory
The position memory system must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory keys can then be programmed again.
●
Open the driver door and do not get into the
vehicle.
●
Operating the seat settings from outside the
vehicle.
●
Tilt the backrest fully forward.
●
Release the control to set the angle and then
press again until an audible warning is heard.
WARNING
Adjust the memory function only when the
v
ehicle is stationary.
Note
If the driver door is opened approx. 10 mi-
nut
es after the vehicle was unlocked or later,
the driver seat and the exterior mirrors do not
move automatically.
Loading ...
Loading ...
Loading ...