Loading ...
Loading ...
Loading ...
284
Storing objects
Net partition
P
artition net behind the rear seat
Valid for: Leon Sportstourer
Fig.183 In the boot: securing the partition net.
Fig.184 In the boot: r
emoving the partition net.
Pulling out and securing the net partition
●
Pull up handle ›››Fig.183
2
to remove the
net fr
om the casing
4
.
●
Hook in the net partition on the right or left
side
3
(magnified image).
●
Hook in the net partition into the housing on
the other side
1
by pulling the rod.
The net partition is pr
operly assembled when
the T-shaped ends are firmly secured in the
corresponding housings
3
and
1
.
R
etracting the net partition
●
Unhook the rod from the housings
3
and
1
.
●
Roll up the net into the casing
4
lowering it
with your hand.
R
emoving the net partition
●
Fold the rear seat backrests forward.
●
Press the left or right release catch
›››Fig.184 in the direction of the arrow
1
.
●
Remove the casing from the support in the
dir
ection of the arrow ›››Fig.184
2
.
Fitting the net par
tition
●
Fold the rear seat backrests forward.
●
Fit the casing in the right and left supports.
●
Press the casing into the left and right sup-
ports in the opposite direction to the arrow
›››Fig.184
2
until it engages. The red mark-
ings on the r
elease buttons should no longer be
visible.
WARNING
●
Always secure objects, even when the net
par
tition is properly assembled.
●
There should be nobody behind the as-
sembled partition when the vehicle is mov-
ing.
●
The attachments on the backs of the rear
seats must never be used to fit the net par-
tition when the rear seat backs are in their
vertical position.
NOTICE
Incorrect handling of the net partition could
cause damage
.
●
Do not release the net partition when low-
ering it, as the net and other vehicle parts
could be damaged. Roll down the net parti-
tion by hand.
Net partition with the rear seat backs
folded down.
Valid for: Leon Sportstourer
Loading ...
Loading ...
Loading ...