Loading ...
Loading ...
Loading ...
Safety
47
Seat belts
●
Never use seat belt clips, fastening rings or
simil
ar items to alter the position of the belt
webbing.
●
Frayed or torn seat belts or damage to
the connections, belt retractors or parts of
the buckle could cause severe injuries in the
event of an accident. Therefore, you must
check the condition of all seat belts at regu-
lar intervals.
●
Seat belts which have been worn in an ac-
cident and have been stretched must be re-
placed by a specialised workshop. Renewal
may be necessary even if there is no ap-
parent damage. The belt anchorage should
also be checked.
●
Do not attempt to repair a damaged seat
belt yourself. The seat belts must not be re-
moved or modified in any way.
●
The belts must be kept clean, otherwise
the retractors may not work properly.
Seat belt buckled indication
It lights up red
The driv
er or one of the passengers have
not fastened their seat belts.
The control lamp
lights up to remind the
driv
er to fasten their seat belt.
Before starting the vehicle:
●
Fasten your seat belt securely.
●
Instruct your passengers to fasten their seat
belts pr
operly before driving o.
●
Protect children by using a child seat ac-
cording to the child's height and weight
›››page61.
When starting to drive, if the vehicle's speed
exceeds approx. 25km/h (15mph) and the seat
belts are not fastened or are unfastened while
driving, a warning sound will be heard for a few
seconds. In addition, the warning lamp
on the
instrument clust
er display flashes.
The lamp
goes out when the ignition is on
and all occupants hav
e fastened their seat
belts.
Rear seat belts fastened display
Fig.23 Instrument clust
er: indication of the
status of the rear seat seat belts.
Depending on the version of the model, when
the ignition is s
witched on, the status display of
the belts ›››Fig.23 informs the driver on the in-
strument panel display whether the occupants
of the rear seats have their seat belts fastened.
It indicates that the corresponding seat is
empty.
Indicates that the seat is occupied and the
occupant is wearing the seat belt.
If a rear seat occupant unfastens his/her seat
belt whil
e driving, the
symbol lights up for
a maximum of 60 seconds. If you driv
e faster
than approx. 25 km/h (15 mph), an audio signal
sounds for a few seconds.
If a seat belt is fastened or unfastened while
driving in some of the rear seats, the seat belt
status is displayed for approximately 30 sec-
onds.
Loading ...
Loading ...
Loading ...