Loading ...
Loading ...
Loading ...
Problem
Only the speaker on
one side can be
heard.
No sound from the
effect speakers.
No sound from the
center speaker.
Cause
Incorrect cable connections.
Tile sound ef!i_ct is switched oft_
A Dolby Surround, Dolby Digital or DTS
decoding DSP program is being used with
material not encoded with Dolby
Surround, Dolby Digital or DTS.
A digital signal with a sampling
frequency grea_er than 48 kHz is input to
Ibis uniL
Tile output level of the center speaker is
set to minimum.
"SOUND IA CENTER" on the set menu
is set to NON.
One of the Hi-Fi DSP programs (1 to 4)
has been selecled (except for 6ch Stel_O).
The source encoded with a Dolby Digital
or DTS signal does not have a center
channel signal.
Remedy
Connect tile cables properly. If tile problem persists,
lhe cables may be defective.
Press STEREO/EFFECT to turn it on.
Select another DSP program.
Raise the level of the center speaker.
Select the appropriate mode tbr your center speaker.
Select another DSP program.
Referto
page
16
25 - 30
48
39
25 - 30
No sound from the Tile output level of the rear speakel_ is se_ Raise the output level of lhe rear speakers. 48
rear speakers, lo minimum.
A monaural source is being played with Select anther DSP program. 25 - 30
program 9.
No sound from the "SOUND 1E BASS" on the set menu is Select SWFR or BOTH. 40
subwoofer, set to MAIN when a Dolby Digital or
DTS signal is being played.
"SOUND 1E BASS" on the set menu is Select BOTH. 40
set to SWFR or MAIN when a 2-channel
source is being played.
Tile source does not contain low bass _
signals (90 Hz and beklw). _
Poor bass "SOUND 1E BASS" on the set menu is Select MAIN. 40
reproduction, set to SWFR or BOTH and your system
does not include a subwoofer.
Tbe speaker mode seuings (main, centel; Sel_t _he appropriate posidon for each speaker based 39 - 40
real; or lear center) on the set menu does on the size of the speakers in your configuration.
not match your speaker configuration.
52
Loading ...
Loading ...
Loading ...