Loading ...
Loading ...
Loading ...
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your
listening room. Not all of 1he following parameters are found in every program.
DSP LEVEL
Function: This parameler adjusts the level of all the DSP effect sounds within a narrow range.
Descriplion: Depending on lhe acoustics of your listening room, you may want to increase or decrease 1he DSP
effect level relative to the direct sound.
Conlrol Range: _5 dB to +3 dB
DELAY
Function:
Conlrol range:
Adjusts the time difference between the beginning of 1he sound from the main speakers and lhe
beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is
generated.
1 to 99 ms (Conlrol range varies depending on the input source and 1he DSP program you use.)
For 6ch Stereo
Function: These parameters adjust fhe volume level for each channel in 6-channel stereo mode.
Conlrol range: 0to 100%
CT LEVEL (Center level)
RL LEVEL (Rear left level)
RR LEVEL (Rear right level)
RC LEVEL (Rear center level)
For PRO LOGIC II Music
PANORAMA
Function: Extends the front slereo image to include 1he surround speakers for a wraparound effect.
Choices: OFF/ON, initial setting is OFE
DIMENSION
Function: Graduany adjusts the soundfield either towards the front or towards the rear.
Conlrol range: -3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).
CT WIDTH (Center width)
Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards lhe main left and right speakers.
Conlrol range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from main left and right speakers), initial setting is 3.
For DTS Neo:6 Music
C. IMAGE (Center Image)
Function: This parameter adjusts the center image from all three front speakers to varying degrees.
Conlrol Range: 0 to 0.5
5O
Loading ...
Loading ...
Loading ...