Loading ...
Loading ...
Loading ...
Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation.
_
[] Turn on the power of this unit and all
connected components.
[] Select the source component you want to
record from.
or
©
Front panel Remotecontrol
[] Start playback (or select a broadcast station)
on the source component.
[] Start recording on the recording component.
• Do a test recording befoie you start an actual recording.
• When this unit is set in standby mode, you camlot iecord
between the components connected to it.
• DSP programs and volume, bass, and treble settings do not
affected the lecolded material.
• You cannot record from a source connected to the 6CH
1NPUT jacks on this unit.
• Input sources are not output to the same OUT (REC) channel.
(For example, the signal input from VCR IN is not output to
VCR OU_E)
• This unit's DIGITAL OUTPUT jack and analog OUT(REC)
jacks are independent. To record a source using a digital
recording component connected to the DIGITAL OUTPUT
jack, connect the source component to one of the DIGITAL
INPUT jacks.
• Check the copyright laws in your country if you wish to
record from records, CDs, r_dio, etc. Recording of
copyrighted material may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may he disturbed due to those signals.
• Special considerations when recording
DTS material
The DTS signal is a digital bitstream. Atlempfing to
digitally record the DTS bitslream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources lhal have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For LDs, DVDs and CDs encoded with DTS, follow the
operating instructions of your player to set it to output an
analog signal, if it is compatible with the DTS format.
I
37
Loading ...
Loading ...
Loading ...