Loading ...
Loading ...
Loading ...
[] Press { / ) once to enter
the setup mode of the
selected item.
The last setting you adjusted
appears on the front panel
display.
Depending on the menu ilem,
press/x/v to select a sub
item.
[] Press { / ) repeatedly to
change the menu item
setting.
[] Press A / V repeatedly until the menu
disappears or just press one of the DSP
program group buttons to exit from the set
menu.
- ÷
or
0 0 C9 C9
N_
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in standby mode_
However, if the power cord is disconnected from the
AC outlet, or lhe power supply is cut for more than
one week, lhe stored data will be lost. If this happens,
adjust the items again.
Use this feature to select suitable oulput modes for your
speaker configuration.
• Some menu item settings have no effect when the unit _s
reproducing a source with a digital signal sampling frequency
greater than 48 kHz.
• 1A CENTER (center speaker mode)
If you add a center speaker to your speaker configuration,
this unit can wovide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have a large center speaker. The unit
directs the entire range of the center channel signal to the
center speaker.
SML
Select this if you have a small cenler speaken The unit
directs lhe low-frequency signals (90 i_z and below) of
the center channel to the speakers selected with "IE
BASS".
NON
Select this if you do not have a cenler speaker. The unit
directs all of the center channel signal to the main left and
right speakers.
!;i!iiii !i!i i!iii i!ii i!i i !i!!i
®i i iii !!!iiii!i;i'ilil;;!i!!iii ii iiii!ill
The BASIC and SOUND menus
The "BASIC" menu allows you to easily set the
"SOUND 1 SPEAKER SET" and "SOUND 2 SP
DISTANCE" parameters. It is not necessary to reset
any of the parameters in the "BASIC" menu, but you
can access more detailed parameters in the "SOUND"
menu if you wish.
After altering parameters in the "SOUND" menu, if you
select "BASIC 1 SETUP" and then select "SET", the
parameters from the "SOUND" menu alter in response to
any changes you make in "BASIC 1 SETUP". Do not enter
the "BASIC 1 SETUP" menu unless you wish to change
these settings. If you accidentally enter the "BASIC 1
SETUP" menu, select "CANCEL" to return to the
"BASIC" menu. (page 20)
|
39
Loading ...
Loading ...
Loading ...