Loading ...
Loading ...
Loading ...
You can adjust the volume of the speakers while listening
to sound playback.
-1
Use the test tone to set speaker levels so that the volume
from each speaker is identical when heard from your
listening position.
-1
_
3
[] Press AMP.
[] Press LEVEL repeatedly to select the
speaker you want to adjust.
The unit cycles through 1he speakers in the following
order each time you press LEVEL:
MAIN L--_CENTER-->MAIN R--_R SUR.
(rear R)-gREAR CT (rear center)--_L SUR.
(rear L)--_SWFR (subwoofer)-_ .....
..+..
• Pressing LEVEL once opens the level display. Press/x / v at
this time to select a speaker.
[] Press < / ;' to adjust the speaker volume.
• The center and rear speakers can be adjusted by a
maximum of-10dB ~ +10dB.
• The main speakers and subwoofer can be adjusted
by a maximum of -20dB ~ 0dB.
• Youcannot adjustspeakerlevelsifdle"SOUND I SPEAKER
SET" parameter in the set menu is set to NON.
• You cannot adjust the subwoofer level if the "IE BASS"
parameter in "SOUND 1 SPEAKER SET" in the set menu is
set to MAIN.
• If you use LEVEL to adjust speaker levels, the speaker levels
you previously set with the test tone will also change.
• If you select "BASIC 1 SETUP" in the set menu and then
select "SET", speaker levels change in response to any
changes you make in "BASIC 1 SETUP".
[] Press AMP.
[] Press TEST.
The unit will output a test tone.
[] Press/x / x/repeatedly to select a speaker
to adjust.
Each time you press v, the unit will cycle through
the speakers in the following order:
TEST LEFT(main L)--_TEST
CEN_R(center)-->TEST RIGHT(main R)-+TEST R
SUR.(rear R)--_TEST REAR CNTR(rear
center)-+TEST L SUR.(rear L)-+TEST
SUBWOOFER(subwoo fer)--> .....
(Press/x to cycle the speakers in the reverse order.)
[] Press (/;' to adjust speaker volumes.
[] PressTEST when you have completed your
adjustment.
The test tone halts.
• You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES
jack.
• Youcannot adjustspeakervolumesifthe"SOUND 1
SPEAKER SET" parameter on the set menu is set to NON.
• You cannot adjust the subwoofer level if the "IE BASS"
palameter in "SOUND 1 SPEAKER SET" in the set menu is
set to MAIN.
• If you select "BASIC I SETUP" in the set menu and then
select "SET", speaker levels change in response to any
changes you make in "BASIC 1 SETUP".
.,,+,:
• Depending on tile soume the unit is reproducing, the speaker
levels set with the test tone may not be to your liking. If this is
tile case, adjust the speaker levels while listening to the
source.
48
Loading ...
Loading ...
Loading ...