Loading ...
Loading ...
Loading ...
94
Lights
returns to its country of origin, the mechanical
adjustment must be r
eset to its original status.
If you do not have experience with this type of
adjustment, SEAT recommends that you go to a
technical service centre.
Note
“Tourist light” is only allowed temporarily. If
you ar
e planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Interior lights
Lighting of the instrument cluster,
displays and controls
The brightness of the instrument and control
lighting can be adjusted in the infotainment
system:
●
Select
> Settings > Lighting >
Vehicle interior lighting; OR
>
Interior settings > Lighting > In-
strument cluster.
The set int
ensity automatically adapts to
changes in ambient brightness in the vehicle.
When the automatic dipped beam light
is turned on, a sensor automatically turns the
dipped beam light on or o, as w
ell as the in-
strument and control lighting, depending on the
ambient brightness.
In some cases, e.g. when driving through a tun-
nel without the automatic dipped beam light
function switched on, the instrument clus-
t
er lighting may even switch o. The objective
of this function is to provide the driver with a
visual indication that he or she should activate
the dipped beam. If your vehicle is fitted with
a digital instrument cluster, the message Turn
on the lights will be displayed on the in-
strument cluster.
Interior and reading lights
Fig.74 Det
ail of headliner: front interior
lighting.
Turning the interior lights on or o.
Door contact connection. The interior
lights come on aut
omatically when you
unlock the vehicle, open a door or remove
the key from the ignition. The light goes out
a few seconds after closing all the doors,
when locking the vehicle or connecting the
ignition.
Turning the reading light on and o
The light controls may vary depending on the
vehicle version.
Luggage compartment lighting
The light is activated when the rear lid is open,
even when the ignition and lights are turned o.
For this reason, ensure that the rear lid is always
closed.
Background lighting
The background lighting lights up the area of
the centre console and the footwell area and,
depending on the version, the front door panels
and the air vents as well.
It will be switched on at full brightness when the
doors are opened and the lights will be dimmed
during driving, when the light selector is in
,
or .
The brightness and col
our of the background
lighting can be adjusted in the infotainment
menu using the function button
> Set-
tings > Background lighting; OR
>
Background lighting.
Loading ...
Loading ...
Loading ...