Loading ...
Loading ...
Loading ...
Driver information
23
Instrument panel
1)
Valid for the SEAT Digital Cockpit.
–
–
–
–
–
–
–
–
–
–
Since refuel: Displ
ay and storage of
the journey data and the consumption val-
ues collected. When refuelling, the memory
is deleted.
Long-term: This memory contains travel
data up to a maximum of 19hours and
59 minutes or 99 hours and 59 minutes, or
up to a maximum of 1999.9 km or 9999.9
km. When one of these values is exceeded
(varies depending on the version of the in-
strument panel), the memory is deleted.
Delete journey data presets
●
Select the memory that you wish to erase.
●
Keep the
button on the multi-function
st
eering wheel pressed for approximately 2
seconds.
Select the instructions
In the Infotainment system, in the menu Vehicle
settings, you can display dierent travel data
›››page36.
Current consumption: The current fuel
consumption display operates throughout
the journey, in litres/100 km; and with the
engine running and the vehicle stopped, in
litres/hour.
Average consumption: The average
fuel consumption is displayed after driving
for approximately 300 metres.
Travelling time: This indicat
es the
hours (h) and minutes (min) since the igni-
tion was switched on.
Range:
1)
Approximate distance in km that
can still be travelled if the same driving
style is maintained.
Distance travelled: Distance covered
in km (m) after switching on the ignition.
Average speed: The average speed will
be shown after driving for approximately
100 metres.
Digital speed: Current speed dis-
played in digital format.
Eco tips: Recommendations messages
are shown to reduce consumption through
good driving practices, e.g. Air condi-
tioning on: close the window.
Setting a speed warning
●
Select the display Warning at ---km/h or
W
arning at ---mph.
●
Press the
button on the multi-function
st
eering wheel to memorise the current speed
and activate the warning.
●
Activate: set the desired speed within 5 sec-
onds by rotating the wheel on the multi-func-
tion steering wheel. Next, press the
button
again or w
ait for a few seconds. The speed is
stored and the warning activated.
●
Deactivate: pr
ess the
button. The stored
speed is del
eted. The warning can be set for
speeds of between 30 and 250km/h (18 and
155mph).
Oil temperature display
The engine reaches its operating temperature
when, under normal driving conditions, the
oil temperature is between 80°C (176°F) and
120°C (248°F). If a great eort is required from
the engine and the outside temperature is high,
the engine oil temperature may increase. This
does not present any problem as long as the
warning lamps
or ›››page27
8 do not
appear on the display.
Warning and information messages
The system runs a check on certain com-
ponents and functions when the ignition is
switched on and while the vehicle is moving.
Faults are displayed on the instrument cluster
display as red and yellow warning symbols
›››page11 accompanied by messages and,
depending on the case, even an audible warn-
ing. The representation of the messages and
symbols may vary depending on the version of
the instrument panel.
Existing faults can also be checked man-
ually. To do this, open the Vehicle status
›››page30 menu.
Loading ...
Loading ...
Loading ...