Loading ...
Loading ...
Loading ...
92
Lights
●
On roads with insucient lighting with v
ery
reflective signs
●
If road users are insuciently lit up, e.g. pe-
destrians or cyclists.
●
On closed curves, when the trac in the
opposite direction is partially hidden, on pro-
nounced slopes or inclinations.
●
On roads with trac in the opposite direction
and with a central reservation barrier where the
driver can see over it e.g. lorry drivers.
●
In the event of fog, snow or heavy rain
●
In the event of dust or sand storms
●
If the windscreen is damaged in the camera's
field of vision.
●
If the camera's field of vision is misted up, dirty
or covered by a sticker, snow or ice.
●
If the camera is damaged or if the power sup-
ply has been cut o.
WARNING
The convenience features of the main beam
assist shoul
d not encourage the taking of
risks. The system is not a replacement for
driver concentration.
●
You are always in control of the main beam
and adapting it to the light, visibility and
trac conditions.
●
It is possible that the main beam headlight
control does not recognise all driving situa-
tions and is limited under certain circumstan-
ces.
●
When the field of vision of the camera is
dirty, covered or damaged, operation of the
main beam control may be aected. This
also applies when changes are made to the
vehicle lighting system, for example, if addi-
tional headlights are installed.
NOTICE
To avoid aecting the oper
ation of the sys-
tem, take the following points into considera-
tion:
●
Clean the field of vision of the camera reg-
ularly and make sure it is free of snow and
ice.
●
Do not cover the field of vision of the cam-
era.
●
Check that the windscreen is not damaged
in the area of the field of vision of the cam-
era.
Note
●
The headlight flasher can be turned on and
o manually at any time with the turn signal
and main beam lever ›››page90.
●
If there are objects that radiate light in the
camera's area of influence, e.g. a portable
navigation system, this may aect the oper-
ation of the main beam assist system.
“Coming home” and “Leaving home”
function (e
xterior orientation light-
ing)
The “Coming home” and “Leaving home” func-
tion lights up the vehicle’s immediate surround-
ings when getting into and out of it in the dark.
This light is automatically controlled by a light
sensor.
Turning on the “Coming home” light
●
Unlocks the vehicle (if the light switch is in
position
and the light sensor detects dark-
ness).
T
urning o the “Coming home” light
●
It turns o aut
omatically once the lights o
delay time has elapsed.
●
OR: lock the vehicle.
●
OR: rotate the light switch to position
.
●
OR: s
witch on the ignition.
Turning on the “Leaving home” light
●
Switch the ignition o.
The “Leaving Home” light turns on if the light
control is in position
and the light sensor
det
ects darkness.
The lights-o delay countdown starts when the
last door or rear lid of the vehicle is closed.
Loading ...
Loading ...
Loading ...