Loading ...
Loading ...
Loading ...
Wheels and tyres
297
Tyre repair
1
2
3
4
5
6
WARNING
Using the puncture repair kit can be danger-
ous, par
ticularly when filling the tyre on the
roadside. To reduce the risk of serious injury,
consider the following:
●
Stop the vehicle safely as soon as possible.
Park it at a safe distance from surrounding
trac to fill the tyre.
●
Ensure the ground on which you park is flat
and solid.
●
All passengers and particularly children
must keep a safe distance from the work
area.
●
Turn on the hazard warning lights to warn
other road users.
●
Always stop the engine, apply the elec-
tronic parking brake and put it in gear if fitted
with a manual gearbox, or press the parking
lock button P if fitted with an automatic gear
box, to reduce the risk of involuntary move-
ment of the vehicle .
●
Use the tyre mobility system only if you
are familiar with the necessary procedures.
Otherwise, you should seek professional as-
sistance.
●
The tyre mobility set is intended for tempo-
rary emergency use only until you can reach
the nearest specialised workshop.
●
Replace the repaired tyre with the tyre mo-
bility set as soon as possible.
●
The sealant is a health hazard and must be
cleaned immediately if it comes into contact
with the skin.
●
Always keep the tyre mobility set out of the
reach of small children.
WARNING
A tyre fill
ed with sealant does not have the
same performance properties as a conven-
tional tyre.
●
Never drive faster than 80km/h (50mph).
●
Avoid heavy acceleration, hard braking
and fast cornering.
●
Drive for only 10 minutes at a maximum
speed of 80 km/h (50mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observing
any legal requirements.
Note
A new bottle of sealant can be purchased at
SEAT deal
erships.
Note
Take into account the separate instruction
manual pr
ovided by the tyre mobility system
manufacturer.
Anti-puncture kit contents
Fig.200 St
andard display: contents of the
anti-puncture kit.
The anti-puncture kit is located underneath the
floor co
vering in the luggage compartment. In-
cludes the following components ›››Fig.200:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to re-
mind that the maximum advisable speed
“max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor (depending on the version,
the model may vary).
ON/OFF switch
Air bleed screw (it can also be integrated in
the inflator tube).
Loading ...
Loading ...
Loading ...