Loading ...
Loading ...
Loading ...
Driving
113
Starting and stopping the engine
Trips abroad
The v
ehicle has been manufactured for a spe-
cific country and meets the approval regula-
tions in force in that country at the time it was
manufactured.
If you are going to use the vehicle abroad tem-
porarily or for a short period of time, please
observe the relevant instructions.
Some countries have special safety regulations
and provisions that the vehicle may not com-
ply with. Before travelling abroad, SEAT recom-
mends that you seek information from one of
your dealers about the legal provisions in force
in your destination country.
If you are going to sell the vehicle in another
country or use it there for a longer period of
time, please observe the legal regulations in
force in the country in question.
In some cases it may be necessary to install or
remove certain equipment at a later date, and
to deactivate certain functions. Sets and types
of services may also be aected. In particular,
this can occur if the vehicle is to be used in an-
other climatic region for a long period of time.
Due to the dierent frequency bands around
the world, the factory-fitted infotainment sys-
tem may not work in another country.
With petrol vehicles, it should be ensured that
lead-free petrol is available throughout the
journey. Seek information about service station
networks selling unleaded fuel.
SEAT importers and distributors will provide in-
formation about the technical preparation that
your vehicle requires and also about necessary
maintenance and repair possibilities.
NOTICE
SEAT does not accept liability for any dam-
age t
o the vehicle due to the use of a lower
quality fuel, an inadequate service or the
non-availability of genuine spare parts.
Starting and stopping the
engine
Ignition lock
Fig.82 Ignition l
ock
Key positions:
1
Ignition o. Key can be removed from the
vehicle.
2
Ignition is switched on.
3
Starting the engine.
Locking and unlocking the steering wheel
●
Lock the steering wheel: remove the key from
the ignition and t
urn the wheel until it locks. De-
pending on the country, in vehicles with auto-
matic transmission, in order to remove the key,
move the gear shift to the P position. If neces-
sary, press the gear shift blocking key and re-
lease it.
●
Unlock the steering wheel: put the key into
the ignition and t
urn it at the same time as the
steering wheel in the direction indicated by the
arrow. If it is not possible to turn the steering
wheel, it may be because it is locked.
Start-Stop system
If the vehicle is stopped and the Start-Stop sys-
tem switches o the engine, the ignition remains
switched on.
Automatic transmission: before leaving the vehi-
cle, make sure that the ignition is switched o
and the selector lever is in position P.
Loading ...
Loading ...
Loading ...