Loading ...
Loading ...
Loading ...
162
Parking and manoeuvring
A
B
C
Parking aid Plus
Description
Fig.117 P
arking aid view on the Infotainment
system display.
Parking aid plus assists the driv
er by giving
visual and audio warnings about obstacles de-
tected in front of and behind the vehicle.
The bumpers are fitted with sensors. When
an obstacle is detected, it is indicated by au-
dible signals and in the Infotainment system
›››Fig.117.
When moving close to an obstacle, it is possible
to know if the obstacle is in front of the vehicle
or behind it according to the sound frequency.
The approximate measurement range of the
sensors is:
1.20 m
1.60 m
0.90 m
As you appr
oach the obstacle, the frequency of
the audible signals will increase. The signal will
sound continuously at around 0.30 m: Stop the
vehicle!
If the separation is maintained, the warning vol-
ume is reduced after about 4 seconds.
In order to view the entire periphery of the vehi-
cle, the vehicle must be moved a few metres
forwards or backwards. Therefore, the missing
areas are screened and obstacles at the sides
of the vehicle are displayed ›››Fig.117
C
.
Special f
eatures of ParkPilot with Area View
In the following situations the screened area on
the side of the vehicle is automatically hidden:
●
When a vehicle door is opened.
●
When the TCS is switched o.
●
When there is TCS or ESC regulation.
●
If the vehicle remains stationary for more than
approximately 3 minutes.
Error messages
If a an error or fault message is displayed on
the instrument cluster in Park Assist, there is a
fault.
If the fault doesn't disappear before discon-
necting the ignition, it will not be indicated next
time the parking aid is connected.
If a rear sensor is faulty, only the obstacles in
the front area are detected. If a front sensor is
faulty, only the obstacles in the rear area are
displayed. The symbol
is displayed.
W
e recommend taking the vehicle to a special-
ised workshop to have the fault repaired.
Trailer mode
Fig.118 P
arking assist display on the screen
with trailer attached.
On vehicles with a f
actory-fitted trailer hitch,
when the trailer is connected, the rear sensors
will not activate when reverse gear is engaged
or button
is pressed. Therefore, any objects
behind or t
o the side of the vehicle will not be
indicated on the screen and no audio signals
will sound.
The screen will only display objects detected
at the front, and the vehicle's trajectory will be
hidden.
Loading ...
Loading ...
Loading ...