Loading ...
Loading ...
Loading ...
Miscellaneous situations
265
Changing bulbs
Fig.173 R
emove the bulb holder.
Follow the steps indicated:
●
Check which of the bulbs is defective.
●
Open the rear lid.
●
Remove the rear lid cover in the direction of
the arr
ow ›››Fig.172.
●
Remove the bulb connector ›››Fig.173
1
.
●
Remove the bulb holder unlocking the retain-
ing t
abs
A
.
●
Change the damaged bulb.
●
Use a cloth to remove any fingerprints fr
om
the glass part of the bulb.
●
Check that the new bulb works properly.
●
Carry out the same actions in reverse order
for assembly and pay special attention to plac-
ing the bulb holder, ensuring that the tabs are
properly secured.
Note
For LED lights, you can only change the turn
signal and r
everse light bulbs.
Changing interior bulbs
Interior light and front reading lights
Fig.174 Fr
ont reading light.
●
Insert a fine scr
ewdriver between the casing
and the glass ›››Fig.174.
●
Carefully remove the glass, levering it to
avoid possible damage.
●
Pull the bulbs outwards.
●
To remove the central bulb, hold and press to
one side.
●
Proceed in the reverse order, pressing gently
on the outer edge of the side light.
●
First fit the glass with the fastening tabs over
the frame of the switch. Next press the front part
until the two long tabs click on the support.
Note
In LED courtesy lights it is not possible to re-
pl
ace the light sources. If the light does not
work, take the vehicle to an ocial Service.
Luggage compartment lighting
Fig.175 Boot light.
Fig.176 Boot light.
●
Extract the bulb by pressing on its inside edge
using the flat side of a scr
ewdriver ›››Fig.175.
Loading ...
Loading ...
Loading ...