Loading ...
Loading ...
Loading ...
318
Technical data
Technical data
Indications about the t
ech-
nical data
Vehicle identification data
The values indicated in the technical data may
dier depending on optional equipment or ver-
sion of the model, as well as in the case of spe-
cial vehicles and equipment for certain coun-
tries.
The information in the ocial vehicle documen-
tation takes precedence at all times.
Abbreviations used in the Technical Specifi-
cations section
kW
Kilowatt, engine power measure-
ment.
PS
Horsepower (not currently used),
engine po
wer measurement unit.
rpm, 1/min
Revolutions per minute – engine
speed.
Nm
Newton metres, unit of engine tor-
que.
CZ
Cetane number, indication of the
diesel combustion power.
RON
Research octane number, indication
of the knock resistance of petrol.
Vehicle ID number
The v
ehicle ID number can be found in the fol-
lowing places:
●
One the vehicle's data label.
●
In front, under the windscreen.
●
To the right in the engine compartment.
Type plate
The type plate is located on the vehicle’s right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Performance
The values apply only to optimal road and
weather conditions.
The vehicle’s performance has been calculated
without any equipment that would aect it, e.g.
accessories.
Fuel consumption
Approved consumption values are derived from
measurements performed or supervised by
certified EU laboratories, according to the legis-
lation in force at the time (for more information,
see the Publications Oce of the European
Union on the EUR-Lex website: © European Un-
ion, http://eur-lex.europa.eu/) and apply to the
specified vehicle characteristics.
The values relating to fuel consumption and
CO
2
emissions can be found in the documenta-
tion provided to the purchaser of the vehicle at
the time of purchase.
Fuel consumption and CO
2
emissions depend
on the equipment/features of each individual
vehicle, as well as on the driving style, road
conditions, trac conditions, environmental
conditions, load or number of passengers.
Tank level
Petrol engines 40 l, 7 l reserve
Natural gas en-
gine
a)
approx. 13.8 kg
Additional petrol tank: 9 l, of
which approx 7.6 l is a reserve
a)
The capacity depends on the ecacy and char-
acteristics of the natural gas pumps. The capacity
indicated is based on a minimum loading pressure
of 200 bar.
Weights
The kerb weight values apply to the vehicle
as ready to drive with a driver (75 kg), oper-
ating fluids and, if applicable, tools and the
spare wheel. The kerb weight increases with
optional equipment and retrofitting of accesso-
ries, which reduces the possible payload ac-
cordingly.
Loading ...
Loading ...
Loading ...