Loading ...
Loading ...
Loading ...
Additional information
Troubleshooting
! Improper operation is often mistaken for trouble or a malfunction that occurred in the device. If something is wrong with this unit, check the follow-
ing issues, and also access the following Pioneer DJ support site and check [FAQ] for [XDJ-RR].
pioneerdj.com/support/
Some problems occur due to the connected components. If the problem cannot be resolved after checking the connected components, contact the
service center or your dealer for repairs.
! The unit may not operate properly due to static electricity or other external influences. In such cases, disconnect the power cord and connect it
again to restore normal operation.
Power supply
Problem Check Remedy
The unit does not turn on.
The indicators do not light up.
Is the power cord properly connected? Connect the power cord to an AC outlet. (page 8 )
Is the [u] switch turned on? Turn on the [u] switch.
The power suddenly turns off. Is the auto standby function activated?
(When auto standby is functioning, the
[MASTER REC (WAKE UP)] button is lit in red.)
This unit is shipped with the auto standby function set to on. If you do not
want to use the auto standby function, set [AUTO STANDBY] to [OFF] on the
[MENU (UTILITY)] screen.
Audio output
Problem Check Remedy
Sound is not output, or sound is too
small.
Are the [TRIM] control, channel faders, crossfader
and [MASTER LEVEL] control set to the proper
positions?
Set the [TRIM] control, channel faders, crossfader and [MASTER LEVEL] control
to the proper positions. (page 26 )
Sound is distorted. Is the [MASTER LEVEL] control set to the proper
position?
Adjust the [MASTER LEVEL] control so that the master channel level indicator
lights around [0 dB] at the peak level.
Set [MASTER ATTENUATOR.] to [-6 dB] or [+12 dB] in the [UTILITY] screen.
Is the [TRIM] control set to the proper position? Adjust the [TRIM] control to confirm that the channel level indicator lights up in
orange at the highest volume. (page 26 )
Is the level of sound input to the [MIC] terminal set
to an appropriate level?
Set the [MIC LEVEL] control to the proper position.
Sound is not output, or the output
sound is distorted or noisy.
Is this unit placed near a TV? Turn the TV off, or place this unit farther away from the TV.
Microphone sound is not output or
the volume is low.
Is the [MIC LEVEL] control set to the proper
position?
Set the [MIC LEVEL] control to the proper position.
Is the switch on this unit or the microphone
turned off?
Turn the switch on.
Display
Problem Check Remedy
Playing address is not displayed in the
remaining time display.
— Playing address may not be displayed for files recorded in VBR. This happens
when it takes time for the unit to detect the length of the track and display the
playing address.
The category is not displayed. Is the rekordbox library information stored on the
USB device?
Use a USB device containing the library information that is exported from
rekordbox to the device..
Is the USB device write-protected? Disable write-protection on the USB device to make it writable.
The scale is not displayed. Is the track over 15 minutes long? The scale is not displayed for tracks whose playing time is over 15 minutes.
The enlarged waveform is not
displayed.
Is the track over 60 minutes long? The enlarged waveform is not displayed for tracks whose playing time is over 60
minutes.
Functions and operations
Problem Check Remedy
The crossfade function does not work.
Is the [CROSS FADER CURVE (THRU,
, )]
(crossfader curve selector) switch set to [THRU]?
Set the [CROSS FADER CURVE (THRU, , )] (crossfader curve selector)
switch to a position other than [THRU]. (page 26 )
The back cue function does not work. Is a cue point set? Set a cue point.
Beat effect does not work. Is the [LEVEL/DEPTH] control set to the center
position?
Rotate the [LEVEL/DEPTH] control clockwise or counterclockwise.
Is the [TRIM] control set to the proper position? Set the [TRIM] control to the proper position.
Color effect does not work. Is the [SOUND COLOR FX
(DUB ECHO, PITCH, NOISE, FILTER)] button
pressed?
Press the [SOUND COLOR FX (DUB ECHO, PITCH, NOISE, FILTER)] button.
Is the [COLOR] control set to the proper position? Set the [COLOR] control to the proper position.
The SYNC function does not work. Has the music file been analyzed? Perform file analysis.
En
30
Loading ...
Loading ...