Loading ...
Loading ...
Loading ...
h Time display (minutes, seconds, milliseconds)
Displays the remaining time or elapsed time.
i Playing address display/scale display (1-minute
intervals)
The track is displayed as a bar graph. The current playback position
is displayed as a white vertical line. When the elapsed time is dis-
played, the left edge of the graph lights up. When the remaining time
is displayed, the display turns off from the left side. The entire graph
flashes slowly when there are less than 30 seconds remaining in the
track, and begins flashing rapidly when less than 15 seconds remain.
j Waveform display
Displays the waveform of the sound.
The color of the enlarged waveform can be changed using rekordbox
or [MENU (UTILITY)] of this unit.
= Changing the color set in the USB device (p. 27 )
k Playing speed display
The value changes according to the position of the [TEMPO] slider.
l Loop display
Lights up during loop playback.
= Setting loops (p. 13 )
m Loop beat display
Indicates the number of beats currently set in the loop.
n BPM display section (for deck)
Displays BPM (Beats Per Minute) of the track currently being played.
o QUANTIZE (for deck)
Displayed when the quantize function of the deck operation is on.
Displayed in red when the quantize function is enabled, and in gray
when the function is disabled.
= Using the quantize function (p. 27 )
p QUANTIZE BEAT VALUE
Indicates the size of the beat of the quantize function.
q Playing speed adjustment range display
Indicates the range in which the playing speed can be adjusted with
respect to the original playing speed recorded on the medium.
r AUTO PLAY
Lights up when the auto play mode is on in the [UTILITY] screen.
= Auto-play mode (p. 27 )
s ZOOM and GRID ADJUST mode display
When the rotary selector is pressed for over 1 second, the mode
switches between [ZOOM] mode and [GRID ADJUST] mode.
! [ZOOM] mode: Two waveforms can be simultaneously zoomed in
on or out of when the rotary selector is turned.
! [GRID ADJUST] mode: The beat grid of the track loaded in the
active deck can be adjusted when the rotary selector is turned.
The beat grid can be adjusted using the [MENU (UTILITY)]
button.
— [RESET]: Resets the adjusted beat grid.
— [SNAP GRID (CUE)]: Moves the first beat to the position of the
currently set cue.
— [SHIFT GRID]: Reflects the results adjusted by using pitch
bend during SYNC on the beat grid.
t Parameter display section (BEAT)
Displays the parameters specified for the individual effects.
u BPM display section (for effects)
Displays the automatically detected BPM in auto mode.
The color of the characters turns green during manual input mode,
and [TAP] is displayed. This displays the manually input BPM value.
v QUANTIZE (for effects)
Displayed when the quantize function of the beat effect is on.
Displayed in red when the quantize function is enabled, and in gray
when the function is disabled.
= Using the quantize function (p. 27 )
w Channel select display section
The name of the channel to which the effect is applied is displayed.
x Effect name
The name of the selected effect is displayed.
= Using the beat effect function (p. 24 )
Setting auto cue
When a track is loaded or the track search operation is performed, the
silent section at the beginning of the track is skipped and the cue point
is automatically set at the point immediately before the sound starts.
Press the [TIME MODE (AUTO CUE)] button for over 1
second.
Auto cue is set to on.
[A. CUE] is displayed on the main unit display.
! When the [TIME MODE (AUTO CUE)] button is pressed again for
over 1 second, auto cue is set to off.
! The auto cue level setting remains in the memory, even when the
power is turned off.
! When the [TIME MODE (AUTO CUE)] button is pressed for over 1
second while pressing the [SHIFT] button, switching auto cue on/off
is possible only for the deck for which the [SHIFT] button is pressed.
Changing the auto cue level
The cue point to be set as the auto cue can be selected using one of the
methods below.
Setting the cue point by the acoustic pressure level
identified as a silent section (8 levels)
–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB
Automatically setting stored cues as cue points
MEMORY: The stored cue point nearest the beginning of the track is set
as the cue point for auto cueing.
! When [MEMORY] is set, [A. CUE] lights up in white on the main unit
display.
! The auto cue level setting remains in the memory, even when the
power is turned off.
1 Press the [MENU (UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
2 Turn the rotary selector, then press it.
Select [AUTO CUE LEVEL].
3 Turn the rotary selector, then press it.
The auto cue level setting changes.
Browsing tracks
You can browse the connected devices and the library on the connected
computer to display the tracks in a list on this unit.
! When a USB device that does not contain the rekordbox library infor-
mation is browsed, the folders and tracks (music files) are displayed
in a list with a tree structure.
Switching to the browse screen
Press the device button that corresponds to the device
whose contents you want to display.
When a button is pressed, the contents of the corresponding source are
displayed in a list.
! When the browse screen is displayed, the [BROWSE(SEARCH)] but-
ton lights.
! When the [BROWSE(SEARCH)] button is pressed while the browse
screen is displayed, the browse screen closes and the screen returns
to the normal playback screen.
When the [BROWSE(SEARCH)] button is pressed again, the previous
browse screen opens.
En
18
Loading ...
Loading ...
Loading ...