Loading ...
Loading ...
Loading ...
Cutting loops (Loop Cut)
During loop playback, press the [CUE/LOOP CALL, c
(LOOP 1/2X)] button.
The time the loop is played is cut in half each time the button is pressed.
Extending loops (Loop Doubling)
During loop playback, press the
[CUE/LOOP CALL, d(LOOP 2X)] button.
The loop’s length is doubled each time the button is pressed.
Using active loops
1 Connect the USB device to this unit.
2 Load a track for which an active loop has been set
with rekordbox.
One loop stored in rekordbox can be set as the active loop.
The set active loop point is displayed as a waveform, as indicated by 1
shown below.
1
When the set point is reached, the loop is set automatically and loop
playback begins.
Emergency loops
With this unit, a 4-beat loop is set automatically to prevent the sound
from being interrupted if a track cannot be played any longer.
! DJ playback is restricted during emergency looping. To cancel emer-
gency looping, load the next track.
Storing cue or loop points
1 Connect the USB device to this unit.
2 Set Cue Point or Loop Point.
3 Press the [MEMORY] button.
[ MEMORY] is displayed on the main unit display for several seconds,
then the point information is stored on the USB device.
Stored cue and loop points are indicated by a [b] at the top of the wave-
form display.
! To store loop points, press the [MEMORY] button during loop
playback.
Calling out stored cue or loop points
1 Connect the USB device to this unit.
2 Load the track containing the cue or loop points you
want to call out.
Stored cue and loop points are indicated by a [b] at the top of the wave-
form display.
3 Press the [CUE/LOOP CALL, c(LOOP 1/2X)] or
[CUE/LOOP CALL, d(LOOP 2X)] button.
Press the [CUE/LOOP CALL, c(LOOP 1/2X)] button to call
out a point before the currently playing position, and press the
[CUE/LOOP CALL, d(LOOP 2X)] button to call out a point after the cur-
rently playing position.
The track jumps to the called out point and pauses.
! When multiple points are stored, a different point is called out each
time the button is pressed.
! Loops set as active loops can also be called out as stored loops.
! If the called out point has a comment set by rekordbox, the comment
is displayed in the area where the name of the track is displayed.
! The set comment list can also be displayed on the track list in the
browse screen by pressing the rotary selector. Also, selecting a com-
ment from the displayed list and pressing the [LOAD 1,2] button will
call out the selected point.
4 Press the [f (PLAY/PAUSE)] button.
Normal or loop playback starts from the point that was called out.
Deleting stored cue or loop points
1 Connect the USB device to this unit.
2 Load the track containing the cue point or loop points
you want to delete.
Stored cue and loop points are indicated by a [b] at the top of the wave-
form display.
3 Press the [CUE/LOOP CALL, c(LOOP 1/2X)] or
[CUE/LOOP CALL, d(LOOP 2X)] button to call out the
point to be deleted.
The track jumps to the called out point and pauses.
! When multiple points are stored, a different point is called out each
time the button is pressed.
4 Press the [DELETE] button.
The main unit display shows [ DELETED], and the selected point
information is deleted.
! When a stored loop set as an active loop is deleted, the active loop is
also deleted.
Using hot cues
When a hot cue is set, that point can be called out and played instanta-
neously. Up to 8 hot cues can be set per music track.
Setting hot cues
1 Press the [HOT CUE (CALL)] button to switch to hot
cue mode.
2 During playback or while pausing, press one of the
Performance buttons at the point at which you want to
set the hot cue.
A hot cue is set at the position at which the button is pressed and the
Performance button lights up. The hot cue is simultaneously stored in
the USB device.
! By pressing the [HOT CUE (CALL)] button in hot cue mode, you can
switch between [HOT CUE] (A, B, C, D) and [HOT CUE2] (E, F, G, H).
! During loop playback, the loop is registered as a hot cue.
! The direction of playback is not recorded for hot cues.
! When a hot cue is set during scratch play, playback may stop
temporarily.
! When the quantize function is on, there may be a slight delay in
operation of this function to synchronize the beat.
! A hot cue which has already been recorded in the Performance
button cannot be re-recorded. To store a new Hot Cue, first delete the
stored Hot Cue.
! The color of the hot cue can be set on this unit or in rekordbox.
When [HOT CUE COLOR] in the [UTILITY] screen is set to [OFF]
Content stored in the hot cue Color
Cue Point Green
Loop Orange
When [HOT CUE COLOR] in the [UTILITY] screen is set to [ON]
En
14
Loading ...
Loading ...
Loading ...