Loading ...
Loading ...
Loading ...
The Universal Remote Control can be programmed
to operate many manufacturers' components, using
the component function buttons for other components.
FeNow the procedures for programming your Remote
Contro with or without a code for the component.
Setting UPthe remote using the numerical keys.
(When code is known):
Po_E_ Confirm that the external component
) is pJugged and operating. Turn the
Press appropriate component
button on the Remote Control.
Enter the 3=digit component
code using the Remote Control
number keys (0 ~ 9 buttons).
PresstheRemoteContro
POWER to test the component.
[3 If the procedure was
successful, the component will
turn on.
Operates
TV (Panasonic Only)
VCR (Preset)
DVD and CD (Preset)
DTV (Panasonic Only)
RCVR Audio Receiver (Preset)
DBS STB & CBL STB
DBS
(Preset)
CBL Cable (Preset)
Personal Video
AUX Recorders, Cassette and
VCR2
Device
TV
VCR
DVD/CD
DTV
Defaumt
Panasonic Code
Panasonic Code
Panasonic Code
Panasonic Code
Panasonic RCVR
Code
Panasonic DBS
Code
Panasonic CABLE
Code
Panasonic
Personal Video
Recorder Code
Notes:
o Determine the manufacturer of the component and look in the
table for the coue
o If the component aces not operate with the Remote Control,
repeat the procedure using another code. (Some brands
have muEiple codes). If an incorrect code is entered, or if the
proceaure takes longer man 30 seconds, the programming
wil! fail.
This procedure searches aN codes and is caned the
sequence method "
Setting to the remote using the step and set method
(When code is not known):
PowER
"[
Confirm that the external
component is plugged in and
on Turn the component off.
_ Press OK and POWER together, for
_!_y _ _ at !east 5 seconds.
Press OK and POWER
together, for at least 5 seconds.
58
Loading ...
Loading ...
Loading ...