Loading ...
Loading ...
Loading ...
For your convenience, First Time Set up menu will
be displayed on screen when the set is turned on \_
for the first time. If needed, follow the menus and
procedures displayed on=screen for setting up the
Press to select "ANT In".
Press to select "Cable" or
"Antenna".
The language of the 0niscreen display is set to English
as the fact°ry setting.
You can se!ect English, Spanish or French as the
on-screen disp!ays language.
3
Press to select Mode.
Press to select "Language".
Press to select "All" or
"Analog".
Press to display Language
screen.
"_ Press to select "English,"
"Espa_ol" or "Frangais".
Language
_ETu_, Press to go to previous screen.
O Or, select _ icon, then press
oKforsameresu,ts
YOUcan scan All (Ana!0g and Digital) channels. If
needed, foll0w the menus and procedures displayed
on-screen for setting up the features. You can also make
the settings in Setup menu.
Press to select "Auto program".
Press to display Auto program
.... _'_
Press to select "Start scan".
Press to start.
Channels available for
reception will be set
automatically.
After Auto Program is complete, the unit will return
to Manual Program mode. To place the channels
that were located by auto scan in memory, move the
cursor to "Apply" and press OK.(pp. 30=31).
If OK _snot pressed after selecting OK, the channels
will not be memorized.
Notes:
, After "Auto program" is comr_leted the unit tunes to the first
channel found dunng 'Auto program".
o If setup is incomplete check connection of Antenna/Cable to
the RF IN Terminal. then try "Auto program" again. (p. 29).
o °'Auto program" must be done when you select the input
signal for the first time or whenever you change the antenna
configuration
o Depending on conditions. "Auto program" may take a while.
25
Loading ...
Loading ...
Loading ...