Loading ...
Loading ...
Loading ...
m SeJect desired channeJ:
Press #H Av or NUMBER keys.
B Adjust to desi[ed voJume level
Press VOL _ O[ VOL-.
• The channel number and volume level are stored even after
the unit is turned off
° Power consumption can be reduced if the volume level is
lowered.
Channe! and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub,channels within a singJe channel. When
tuning to a digital chann el, the unit wiiJ aJso tune to a
Program and wi!! indicate the channel and program in the
on,screen Channel Banner display.
In order to select channels properly, Auto program must
be performed (P. 29),
FOllOwthe PrOcedure below to directly enter the channel
number using the NUMBER keys on the Remote
Control.
_ number. PressOK.
The foJiowing is an example of tuning
to channeJ 15.
3
Channel Banner
Display
1
15
Press OK 15
_ _ Step
3
Direct Ttming Example
Action
Press 1
Press 5
Press -
Press 1
Press OK
Channel Banner
Display
1
15
15-
15:1
15:1
o If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Press the Channel Aver RECALL button, except when
the MENU screen is displayed, to display current unit
status information.
) Press CH ^v to minimize the displayed
channel banner. It will display the
vo__ .... number, and the station
_ntification (if available).
Channel Nnmber
Station identifier
Note:
oThe Station identifier is not displayed when you use Split
Screen moae.
_lf, dudng channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel iS automatica!iy seJected.
I _ _ _ If tuning a digitaJ channel and your
[_ _ channeJ contains more than one
_ _ program, press PROG and enter
the program (1, 2, 3 etc.) using the
NUMBER keys. Press OK. The
PROP following is an example of tuning to
channel 15-1.
Press RECALL to maximize the
@layed channel banner.
Chalmel, Program and Station identifier
Program title
Closed me remaining
setting in Sleep Timer
SAP indication Signal resolution Aspect
33
Loading ...
Loading ...
Loading ...