Loading ...
Loading ...
Loading ...
Setting Up the Remote to Operate Your Cable Box
1 T.moffyonrcable box.
2 Press the MODE button and make sure that the Cable LED is
illuminated.
3 Press the SET button on }'our TV's remote control.
4 Using the number buttons on )'our remote control, enter three
digits of the cable box code listed on page 70 of this manual
for yottr brand of cable box. Make sure you enter three digits
of the code, even if the first digit is a "0."
If there is more than one code listed, try the first one.
5 Press the Power button on the remote control. Your cable box
should tttrn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps
2, 3, and 4, bm tlF one of the other codes listed for your brand
of cable box. If no other codes are listed, try each code. 000
through 077.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "Cable Box" mode, the volume buttons still control your TV's volume.
English-68
Loading ...
Loading ...
Loading ...