Loading ...
Loading ...
Loading ...
I INSTALLATION I
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-9).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or VCR _ear Panel
antenna to the n= oL _ 1
ANTENNA IN terminal Incomi C 3_ ®_ ®
Cable or [
on the 3ack of the Antenna
VCR.
3
VCR Rear Panel TV Rear Panel
Connect a coaxla I _ j ")
andCabtetermmaANTENNAthebetweenantenna°nOUTthetheVcR [-_ '_ o0_L,_(_® @ ( Coaxial Cable
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
Connect a set of L
audio cables
between the AUDIO
OUT jacks on the
VCR and the AUDIO
jacks on the TV.
VCR Rear Panel 13/ Rear Panel
If you hax e a 'mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left or right audio input .jacks of the TM
If your VCR is stereo, you must connect two cables.
5
Connect a video
cable between the
VIDEO OUT jack on
the VCR and the
VIDEO jack on the
TV.
VCR Rear Panel 13/ Rear Panel
. F _
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
* Each external input source device has a diffeient back panel configuration.
English- 11
Loading ...
Loading ...
Loading ...