Loading ...
Loading ...
Loading ...
276
Wheels and tyres
1)
COC = certificat
e of conformity.
Q
R
S
T
U
H
V
Z
W
Y
max.160 km/h (99mph)
max. 1
70 km/h (106mph)
max.180 km/h (112mph)
max.190 km/h (118mph)
max.200 km/h (124mph)
max. 210 km/h (130mph)
max. 240 km/h (149mph)
max. 240km/h (149mph)
max.270 km/h (168mph)
max.300 km/h (186mph)
WARNING
●
New tyres do not have maximum grip dur-
ing the first 600 km. Driv
e particularly care-
fully to avoid possible accidents.
●
Never drive with damaged tyres. This may
cause an accident.
●
If you notice unusual vibrations or if the ve-
hicle pulls to one side when driving, stop the
vehicle immediately and check the tyres.
●
Never use old tyres or those with an un-
known history of use.
New wheels and tyres
It is best to have all wheels and tyres serviced
by a specialised workshop. There they have the
required knowledge, the special tools and the
corresponding spare parts.
●
Even winter tyres lose their grip on ice. If you
have installed new tyres, drive the first 600 km
carefully and at a moderate speed.
●
All four wheels must be fitted with tyres of the
same type, size (rolling circumference) and, if
possible, tread pattern.
●
When changing tyres, do not change just one;
change at least two on the same axle.
●
If you want to equip your vehicle with a com-
bination tyres and rims that are dierent to
those fitted in the factory, inform your special-
ised workshop before purchasing them ›››
The sizes of the rims and tyres approved for
your v
ehicle are listed in the vehicle documen-
tation (e.g. EC Certificate of Conformity or
COC document
1)
). The vehicle documentation
varies depending on the country of residence.
If the type of spare wheel is dierent form the
normal wheels — e.g. in the case of winter tyres
or particularly wide tyres — the spare wheel
should only be used temporarily in the event
of a puncture, and the vehicle should be driven
with care. Refit the normal road wheel as soon
as possible.
In vehicles with four-wheel drive, the 4 wheels
must be fitted with tyres of the same brand,
type and tread so that the traction system is
not damaged by a dierence in the number of
turns of the wheels. Therefore, in the event of
a puncture, only a spare wheel with the same
perimeter as normal tyres should be used.
Manufacturing date
The manufacturing date is also indicated on
the tyre sidewall (or on the inside face of the
wheel):
DOT ... 2220 ...
it means, for example, that the tyre was manu-
factured in the 22nd week of 2020.
WARNING
●
Use only combinations of tyres and rims,
as w
ell as suitable wheel nuts, approved
by SEAT. Otherwise the vehicle may be dam-
aged, causing an accident.
●
For technical reasons it is not possible to
use wheels of other vehicles; in some ca-
ses not even wheels from the same vehicle
model should be used.
●
Always ensure that the tyres you have
chosen have adequate clearance. When se-
lecting replacement tyres, do not rely en-
tirely on the nominal tyre size marked on the
tyre, since the nominal tyre size can dier
significantly depending on the manufacturer.
Loading ...
Loading ...
Loading ...