Loading ...
Loading ...
Loading ...
256
Miscellaneous situations
Changing bulbs
T
ail light bulbs located in the bodywork
Fig.162 Boot: access t
o the bolt securing the
tail light unit.
Fig.163 R
etaining tabs on reverse side of tail
light.
Follow the steps indicated:
●
Check which of the bulbs is defective.
●
Open the rear lid.
●
Remove the lid, levering the flat side of a
scr
ewdriver into the recess ›››Fig.162
1
.
●
Remove the bulb connector
2
.
●
Unscrew the bolt securing the light
3
by
hand or using a scr
ewdriver.
●
Remove the light from the body, gently pull-
ing it toward you, and place on a clean, smooth
surface.
●
Remove the bulb holder unlocking the retain-
ing tabs ›››Fig.163
A
.
●
Change the damaged bulb.
●
To r
efit follow the steps in reverse order, taking
special care when fitting the bulb holder. The
securing tabs must click into place.
NOTICE
Take care when removing the rear light unit
t
o make sure there is no damage to the paint-
work or any of its components.
Note
●
Make sure you have a soft cloth ready to
pl
ace under the glass on the rear light unit, to
avoid any scratches.
●
For LED lights, you can only change the
turn signal and reverse light bulbs.
Front fog light bulb
Fig.164 F
og light: remove the grille
Fig.165 F
og light: detach the bulb holder
Follow the steps indicated:
●
Lever the groove with a screwdriver
›››Fig.164 (arr
ow). Next, remove the clips lo-
cated on the edge of the grill, levering them
gently.
●
Remove the two bolts ›››Fig.165
1
and lever
the clip
2
to remove the front fog light.
Loading ...
Loading ...
Loading ...