Loading ...
Loading ...
Loading ...
146
Assistant systems
Start regulation
Activ
ating the ACC system also automatically
activates the ESC and traction control (TCS).
●
To start regulation, press the button
›››Fig.105.
The ACC sets the curr
ent speed, or the closest
speed within the valid range (30-210 km/h), as
the cruise speed.
Vehicles with automatic transmission: the gear
lever must be in the D, S or M.
With manual transmission: the gear lever must
be in any gear except first and reverse, and the
speed must be higher than approximately 30
km/h (18 mph).
Depending on the driving situation, the follow-
ing indicator lamps come on:
Lights up green
ACC connected, no vehicle detected in
front.
Lights up green
ACC connected, vehicle detected in
front.
When the ACC is in standby, the indicator
lamps light up grey.
Setting speed
To program the speed, press the
or
›››Fig.105 butt
ons to the desired speed. The
speed is adjusted at intervals of 10 km/h (5
mph).
While the ACC is active, you can press the
button to increase the desired speed by 1 km/h
(
1 mph). You can then press
to decrease it
by 1 km/h (
1 mph).
Setting your distance level
The distance can be set to one of five levels,
from very short to very long:
●
Press the button
and then the button or
›››Fig.105.
●
Alternatively, press the button as many
times as necessary t
o set the desired distance.
Keep in mind each country’s regulations on
minimum braking distances.
Suspend regulation (standby)
●
Briefly press the button
›››Fig.105 or
pr
ess the brake pedal.
The ACC indicator lamp is grey; the speed and
distance are saved.
If the ESC or TCS is switched o, the ACC is
automatically interrupted.
Reinstating the cruise control
●
Press the
button. The ACC regulates to
the l
ast speed and distance setting.
●
OR: Press the button
to regulate to the
curr
ent speed.
Switching o
●
Press and hold the button
. The set speed is
cl
eared.
Exceeding the speed regulated by the ACC
While driving with the ACC switched on, the
driver can increase speed by pressing the ac-
celerator pedal. ACC regulation is suspended
until you release the accelerator pedal ›››
.
Set the def
ault distance setting
In the Infotainment system, you can pre-select
the distance level when connecting the ACC
from:
●
Very short, Short, Medium, Long and Very long
using the Infotainment system:
Driver assis-
t
ance > ACC ›››page36.
Changing the driving profile
In vehicles with the SEAT Drive Profile, the se-
lected driving profile can have an influence on
the ACC’s acceleration and braking behaviour
›››page130.
In vehicles without SEAT Drive Profile, the be-
haviour of the ACC can also be aected if any
of the following drive profiles are selected in
the infotainment system in Drive assist. ACC
settings will be the same as those in the SEAT
Drive Profile.
Loading ...
Loading ...
Loading ...