Loading ...
Loading ...
Loading ...
Miscellaneous situations
257
Changing bulbs
●
Remove the bulb connector.
●
Turn the bulb holder to the left and pull.
●
Remove the bulb by pressing on it and turning
it anticl
ockwise at the same time.
●
Replace the bulb, making sure that the fixing
guides are in the right position and then press it
and turn it clockwise.
●
To install the headlight go back through the
above steps in reverse.
●
Check that the bulb works properly.
number plate light
●
Insert the flat part of a screwdriver into the
special slot and remove the bulb.
●
Remove the bulb holder, by turning it until it is
free.
●
Change the bulb.
●
Replace the bulb holder, by turning it until it
fits fully.
●
Fit the light into the space and press until you
hear a “click”.
Note
Depending on how equipped the vehicle is,
the number pl
ate lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
Changing interior bulbs
Interior light and front reading lights
Fig.166 Fr
ont reading light.
●
Insert a fine scr
ewdriver between the casing
and the glass ›››Fig.166.
●
Carefully remove the glass, levering it to
avoid possible damage.
●
Pull the bulbs outwards.
●
To remove the central bulb, hold and press to
one side.
●
Proceed in the reverse order, pressing gently
on the outer edge of the side light.
●
First fit the glass with the fastening tabs over
the frame of the switch. Next press the front part
until the two long tabs click on the support.
Note
In LED courtesy lights it is not possible to re-
pl
ace the light sources. If the light does not
work, take the vehicle to an ocial Service.
Luggage compartment lighting
Fig.167 Boot light.
Fig.168 Boot light.
●
Extract the bulb by pressing on its inside edge
using the flat side of a scr
ewdriver ›››Fig.167.
●
Disconnect the cable.
●
Press the bulb sideways and remove it from
its housing ›››Fig.168.
●
Change the bulb.
Loading ...
Loading ...
Loading ...