Loading ...
Loading ...
Loading ...
133
Installation
www.bora.com
EN
O
In the case of thin worktops, there must be a
sufficiently rigid support plate on the unit.
O
The floor unit must have a continuous back panel
so that the recirculated air is not directed into the
front furniture body compartment.
O
There must be a cut-out in the back panel.
O
A minimum clearance of 25mm between the
back panel of the unit and an adjacent kitchen
unit or room wall must be observed for the return
flow of the recirculation air.
O
No false floor is necessary below the cooktop.
If cable protection (false floor) is planned, the
following must be taken into account:
O
it must be fitted in such a way that it can be
removed for maintenance work.
O
To ensure sufficient cooktop ventilation, a
minimum distance of 15mm to the bottom
edge of the cooktop is to be observed.
O
The drawers and/or shelves in the floor unit must
be removable.
O
For correct installation, the drawers of the
floor unit must be shortened depending on the
installation situation.
10.7.4 Installation dimensions
min.
600
min.
50
199
120
540
(min.
424)
max.
430
60
min.
455
min.
329
min.
100
97
310
PUXA Abluft
(Insel):
PUXU
(Zeile
600):
PUXA Abluft
(Zeile
600):
BORA X
Pure
BO RA L ÜFTU NG SFIBELXX
min.
600
min.
50
199
495
-
575
0
-
80
min.
25
525
(min.
495)
125
700
(min.
600)
min.
50
199
120
640
530
(min.
314)
min.
455
50
min.
279
min.
100
97
60
310
PUXU
mit
zusätzlichem Teleskopauszug
PULBTA (Insel):
min.
675
min.
50
199
600
-
680
105
-
185
min.
25
min.
600
125
Fig. 10.20 Installation dimensions in the case of
recirculated air, installation variant A
B: floor unit with false floor under the cooktop
6
4
1
5
32
Fig. 10.19 Installation variant with false oor
[1] Worktop
[2] Air cleaning box
[3] False floor
[4] Back panel of unit
[5] Return flow of recirculated air
[6] Return flow aperture
The recirculated air [5] is blown into the free space
between the worktop [1] and the false floor [3] (the
air cleaning box [2] does not connect with the back
panel). The recirculated air goes behind the rear
panel of the unit [4] and through the return flow
aperture [6] back into the room.
For installation purposes, this means that:
O
a false floor is necessary below the cooktop.
O
There does not need to be a cut-out in the back
panel of the unit.
10.7.3 Preparing kitchen units for
installation variant A (floor
unit with continuous back
panel)
O
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
Loading ...
Loading ...
Loading ...