Loading ...
Loading ...
Loading ...
EN
104
Functions and operation
www.bora.com
A cooking zone is not working if / are shown
alternately in the display. This happens if...
O
... it is switched on without cookware or with
unsuitable cookware;
O
... the base diameter of the cookware is too small;
O
... the cookware is removed from a switched-on
cooking zone.
If no pot is recognised 10 minutes after setting
a power level, the cooking zone will switch off
automatically.
Permanent pan size recognition
The cooking zone automatically recognises
cookware and switches the corresponding operating
panel on: Manual activation of the cooking zone is
not necessary, see „„7.7 Menu item 7: Permanent
pan size recognition““.
6.5.2 Selecting a cooking zone
X Tap on a cooking zone .
O
The cooking zone controls are activated for 2
seconds and you can apply settings to the chosen
cooking zone.
O
The additional cooking zone functions appear.
X Repeat this process to operate further cooking
zones if necessary.
Changing to another cooking zone
X Tap another cooking zone within 2 seconds
O
The second cooking zone lights up in the
operating panel display and is ready to use.
O
The first cooking zone is dimmed in the operating
panel display and the previous settings remain
active or are adopted.
6.5.3 Setting cooking zone power
levels
The high power output of induction cooktops results
in the very quick heating up of cookware. In order to
avoid burning food, slight adjustment is needed in
comparison to conventional cooking systems when
selecting the power level.
6.4.5 Automatic after-run
The cooktop extractor continues to run at a lower
level and switches off automatically after a defined
time.
The duration of the after-run function can be set
in the menu (10, 15 or 20 minutes). The default
duration of the after-run function is 20 minutes.
O
When the extractor is switched off, the automatic
after-run function is activated.
O
Once the automatic after-run period has lapsed,
the cooktop extractor switches itself off.
i
BORA expressly recommends use of the
cooktop extractor after-run function.
6.4.6 Filter service display
The cooktop extractor filter service display is
automatically activated when the end of the
activated charcoal filter service life is reached (only
in recirculation mode).
O
The letter
F
by the front left cooking zone
indicator.
O
The filter service display is shown every time the
cooktop extractor is switched on and remains
active until the filter has been changed and the
filter service display has been reset (see “„7.3
Menu item 3: Showing the filter status and
resetting filter service display“”).
O
The cooktop extractor can still be operated
without limitations.
i
The components of the grease filter require
regular cleaning regardless of the filter
service display, see “„8 Cleaning and
maintenance“”.
6.5 Cooktop functions
6.5.1 Pan size recognition
The cooking zone recognises the size of the
cookware automatically and only targets the energy
at that area. It also recognises cookware that is
unsuitable or too small, or if there is no cookware
present.
Loading ...
Loading ...
Loading ...