Loading ...
Loading ...
Loading ...
EN
122
Cleaning and maintenance
www.bora.com
X Remove the packaging from the activated
charcoal filter [1].
X Position the activated charcoal filter correctly
with the help of the printed symbols (arrow left,
grip strap [2] right).
X Hold the activated charcoal filter at both ends.
X Bend the activated charcoal filter into a cylindrical
shape so that both ends of the filter are opposite
each other.
Fig. 8.8 Inserting the activated charcoal lter
through the vent opening
X Tilt the activated charcoal filter towards you
slightly and insert it through the inlet opening.
X Guide the left end of the filter into the opening in
the filter housing.
Fig. 8.9 Placing the activated charcoal lter in the
end position
X Push the activated charcoal filter into the filter
housing until it will go no further (to do this,
you can place one finger between the slats and
gradually push the filter into the housing).
O
The end position of the activated charcoal filter
is reached when the filter has been fully pushed
inside the filter housing.
2
1
Fig. 8.5 Removing the activated charcoal lter
from the lter housing
[1] Grip strap
[2] Activated charcoal filter
X Take hold of the activated charcoal filter [2] by
the grip strap [1] and pull it out as far as possible
through the filter housing opening.
Fig. 8.6 Removing the activated charcoal lter
through the inlet opening
X Take hold of the end of the activated charcoal
filter and pull upwards and towards the left until it
is completely out of the inlet opening.
Inserting the activated charcoal filter
OBEN / TOP
2
1
Fig. 8.7 Activated charcoal lter
[1] Activated charcoal filter
[2] Grip strap
Loading ...
Loading ...
Loading ...