Loading ...
Loading ...
Loading ...
20 (800) 449-8691
Before Your First Use — Oven Burn-O Procedure
Important: Before you use the wall oven, it is essenal that you
complete the oven burn-o procedure. You should also do the
baking stone pre dry procedure to condion the baking stone
before use.
This oven burn-o procedure uses the Clean Mode, can take
about 90 minutes to complete, will heat up the appliance, and
will remove all factory oils and residue from its internal parts.
Important: Failure to complete this procedure before rst
using the oven may result in undesirable odors, avors,
excessive smoke, and create smells dicult to remove.
1. Take out the baking stone from the upper oven and set it
aside for the pre dry procedure. If you do not remove the
stone, it could shaer.
2. Take out the oven racks, the extension rack, and the
temperature probe.
3. On the touch screen control, tap Clean on the Select Mode
screen.
4. Tap Start on the Select Clean screen to start the cleaning
cycle, which will take 90 minutes.
5. The Cleaning in Progress mer will start counng down
from “1:30”. You can tap OFF at any me to stop the
process.
6. When the me is up, listen for a tone to indicate the Clean
cycle is complete. The oven will sll be hot at this point,
but you will be able to use it.
7. Wait for the oven to cool completely before you put back
the oven racks, the extension rack, and the other items.
Important: During this process, you may noce a strong odor,
some smoke, and/or condensaon on the front of the oven
(including the oven doors, oven windows, control panel, and
side panel) as any oils and solvents on internal parts are
burned o. This is normal and is the primary reason for this
burn-o.
Loading ...
Loading ...
Loading ...