Loading ...
Loading ...
Loading ...
EN
41
Picture mode (Photography)
METERING MEMORY LOCK
We often want to arrange important subject elements outside the center
of the picture for reasons of picture composition and these elements may
sometimes be very bright or very dark. Center-weighted metering and
spot metering, however, mainly capture an area in the center of the
image and are calibrated to an average gray scale value. Subjects or
situations like the ones described above can be easily handled using the
metering memory lock.
The shutter button and/or the joystick can be used to save the exposure
setting (for PP, AA and TT) and the automatic focus (AFAF) - depending on
various menu settings.
Notes
• A light balance indicating the offset from the saved measured value is
displayed.
• If the aperture and/or exposure time are changed during this period,
the relevantly other value will be adjusted and displayed accordingly.
Pressing the shutter button
The AFAF setting is saved - and only in AFsAFs mode; the exposure setting can
also be saved
▸ Select SETUPSETUP
▸ Select Customize ControlsCustomize Controls in the main menu
▸ Select Shutter ButtonShutter Button in the submenu
▸ Activate the function (AE Lock ONAE Lock ON)
▸ Place the cross hairs in the viewfinder
over the subject element you
want to focus on
▸ Tap the shutter button
• The measurement is taken and saved.
• The stored value remains active as long as you hold the pressure
point.
• The shutter button memory function only applies for a single
exposure.
▸ Selecting the final image section
▸ Shutter release
Using the joystick (in Live View mode only)
▸ Press the LV button
▸ Use the joystick to zero in on the subject element you wish to bring
into focus on the LCD panel
▸ Press the joystick
or
▸ Tap the shutter button
• The measurement is taken and saved.
• The stored value remains active as long as you hold the pressure
point.
• The shutter button memory function only applies for a single
exposure.
▸ Selecting the final image section
▸ Shutter release
Notes
• The exposure and AFAF settings can be stored. There are various function
combinations available, which you can define via menu control.
• The storage function of the joystick remains active while it is held, i.e.
for any number of pictures and even if the shutter button is pressed
simultaneously.
• The storage function of the joystick applies to the AFsAFs and the AFcAFc
mode.
The joystick for in AF/MF mode
▸ Select SETUPSETUP
▸ Select Customize ControlsCustomize Controls in the main menu
▸ Select AF/AE Lock ButtonAF/AE Lock Button in the submenu
▸ Select In AF ModeIn AF Mode or In MF ModeIn MF Mode
In AF Mode
Working method of the three function options:
– AF/AE-LockAF/AE-Lock (factory settings)
– Shutter button: AFsAFs setting
– Joystick: exposure setting, AFsAFs/AFcAFc setting
– AE-LAE-L
– Shutter button: AFsAFs setting
– Joystick: Exposure setting
– AF-LockAF-Lock
– Shutter button: AFsAFs setting
– Joystick: AFsAFs/AFcAFc setting
▸ Select option
In MF Mode
When setting the sharpness manually, you can still activate AF mode
temporarily, i.e. for the relevant picture, by pressing the joystick and/or
save the exposure setting – depending on the current settings.
Working method of the three function options:
– AFs On / AE-LockAFs On / AE-Lock (factory settings)
AFsAFs operation is activated for one exposure, the exposure setting is
saved
The implemented AF setting is retained until it is changed by a manual
adjustment or by pressing the button again.
– AFs ONAFs ON
The same as AFs ON/AE-LockAFs ON/AE-Lock but without saving the exposure setting
– AFc On / AE-LockAFc On / AE-Lock
The same as AFs ON/AE-LockAFs ON/AE-Lock but in AFcAFc mode
– AFc ONAFc ON
The same as AFs ON/AE-LockAFs ON/AE-Lock but without saving the exposure setting
– AE-LockAE-Lock
Saving the exposure setting
▸ Select option
Loading ...
Loading ...
Loading ...